♥♥ 2018 NEW RECOMMEND ♥♥
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
It is impossible to pass Citrix 1Y0-351 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Citrix 1Y0-351 practice questions. You will get a surprising result by our Avant-garde Citrix NetScaler 10.5 Essentials and Networking practice guides.
Q57. Scenario: A NetScaler Engineer has configured COOKIEINSERT persistence with a timeout value of two minutes on an SSL LBvServer. The idle time requirement for the application itself CANNOT be determined. Users report connections are intermittent. Once a session is disconnected, a user must re-authenticate in order to regain access. In order to correct this issue, the engineer should set persistence to with a timeout of minutes. (Choose the correct set of options to complete the sentence.)
A. SOURCEIP; two
B. SSLSESSION; ten
C. SRCIPDESTIP; two
D. COOKIEINSERT; zero
Q58. Scenario: A NetScaler Engineer needs to enable access to a load-balancing virtual server from two customers that belong to different VLANs, VLAN500 and VLAN600. Each customer must access the services and servers specific to their VLAN and should never be able to reach another customer service or servers. Traffic Domain (TD) 1 has been created for VLAN500 and Traffic Domain (TD) 2 for VLAN600. Load-balancing services have also been created for each server on TD1 and TD2. The TD for the virtual server is TD 3 and IP address
188.8.131.52. In order to complete this setup, the engineer should create a load-balancing virtual server with IP 184.108.40.206 on TD 3 and use . (Choose the correct option to complete the sentence.)
A. TD2 services as a backup virtual server
B. TD1 and TD2 services on one virtual server C. TD1 and TD2 services on two virtual servers D. TD1 on one virtual server and TD2 on second
Q59. Scenario: A NetScaler Engineer is troubleshooting an issue and using /var/log/ns.log to view the errors. The logs are being filled with messages like the ones below: Oct 6 14:03:23 <local0.info> 192.168.10.50 10/06/2014:14:03:23 GMT ns1 0-PPE-0 : TCP CONN_DELINK 4471 0 : Source 192.168.10.10:52187 - Vserver 192.168.10.50:80 - NatIP 192.168.10.10:52187 - Destination 192.168.10.50:80 - Delink Time 10/06/2014:14:03:23 GMT - Total_bytes_send 1075 - Total_bytes_recv 352 Oct 6 14:03:30 <local0.info> 192.168.10.50 10/06/2014:14:03:30 GMT ns1 0-PPE-0 : TCP CONN_TERMINATE 4472 0 : Source 192.168.10.35:80 - Destination 192.168.10.51:35341 - Start Time 10/06/2014:14:02:43 GMT - End Time 10/06/2014:14:03:30 GMT - Total_bytes_send 1 - Total_bytes_recv 1 Oct 6 14:03:30 <local0.info> 192.168.10.50 10/06/2014:14:03:30 GMT ns1 0-PPE-0 : TCP CONN_TERMINATE 4473 0 : Source 127.0.0.1:7776 - Destination 127.0.0.2:55623 - Start Time 10/06/2014:14:02:45 GMT - End Time 10/06/2014:14:03:30 GMT - Total_bytes_send 1
-Total_bytes_recv 1 Oct 6 14:03:30 <local0.info> 192.168.10.50 10/06/2014:14:03:30 GMT ns1 0-PPE-0 : TCP CONN_TERMINATE 4474 0 : Source 127.0.0.1:80 - Destination 127.0.0.2:39771 – Start Time 10/06/2014:14:02:46 GMT - End Time 10/06/2014:14:03:30 GMT - Total_bytes_send 1
-Total_bytes_recv 1 Which option should the engineer modify to stop these types of messages from getting logged in /var/log/ns.log?
A. ACL logging in the nslog parameters
B. ACL logging in the syslog parameters
C. TCP logging in the nslog parameters
D. TCP logging in the syslog parameters
Q60. Which built-in TCP profile should a NetScaler Engineer choose to optimize backend server connections, where the servers reside on the same LAN as the appliance?
Q61. A NetScaler implementation is experiencing intermittent network issues, specifically regarding traffic to a back-end service associated with IP address 10.10.1.86. Which command should a network engineer execute to generate diagnostic information to investigate this issue?
A. traceroute 10.10.1.86
B. show run | grep 10.10.1.86
C. nstcpdump.sh host 10.10.1.86
D. show service 10.10.1.86 -summary
In my lab The command must be performed from the shell A. SSL protocol is being used for encryption.
B. The Compression Policy engine is set to default.
C. "Allow Server side compression" is checked on the NetScaler.
D. Responses with the Content-Length or Chunked header are being sent from the server.
Q62. In which two places could a NetScaler Engineer enable TCP Buffering? (Choose two.)
C. HTTP profile
D. Virtual server
Answer: A, B
Q63. Which NetScaler IP address must a NetScaler Engineer set for management and general system access purposes?
Q64. A NetScaler Engineer has installed Command Center, Insight Center, Web Logging and an Integration Pack for System Center. Which tool would be appropriate to see client-side rendering times?
A. Web Logging
B. Insight Center
C. Command Center
D. Integration Pack for System Center