Cisco 200-150 Exam Questions and Answers 2021

NEW QUESTION 1







What can you tell about server ports and their external Interfaces from the exhibits?

• A. vfc3/1 is not correctly connected to server external interface fc2/1.
• B. vfc3/1 is not correctly connected to server external Interface fc2/1 and flogi are unsuccessful.
• C. Server interface vfc3/1 is assigned to NP uplinks fc2/1. fc2/2, fc2/3. and fc2/4. There are 4 successful flogi.
• D. Server interface vfc3/1 is assigned to NP uplinks fc2/1, fc2/2, fc2/3, and fc2/4. There are 4 flogi are in initialization state.

Answer: C

NEW QUESTION 2
Which two options describe what can happen when devices are in the same broadcast domain? (Choose two.)

• A. They are on the same VLAN and the same switch.
• B. They are on different VLANs and the same switch.
• C. They are on different VLANs and different switches.
• D. They are on the same VLAN and different switches.

Answer: AD

NEW QUESTION 3
What is oAuth?

• A. Allows an application to act on behalf of a user.
• B. Allows a user to act on behalf of an application.
• C. A type of authentication used when users sign into Cloud applications, such as Cisco Spark.
• D. A type of authentication used whenintegrating aCloud applications with a premisessolution.

Answer: B

NEW QUESTION 4
If a Nexus switch receives a frame and no MAC table entry is found for the destination, what will take place?

• A. The frame will be dropped.
• B. The frame will be flooded.
• C. The sender will be notified.
• D. The destination address will be learned.

Answer: B

NEW QUESTION 5
What is the maximum distance that is supported by Cisco passive Twinax cables?

• A. 5m
• B. 3m
• C. 4m
• D. 10m

Answer: A

NEW QUESTION 6
When you enter the feature npv command on a storage-capable switch from Cisco, what is the result?

• A. N-port Virtualization is enabled without rebooting.
• B. the switch erases the current configuration before it enables the feature N-port Virtualization.
• C. The switch reloads and erases the current configuration before it enables the feature N-port Virtualization.
• D. N-port ID Virtualization is enabled without rebooting.

Answer: C

NEW QUESTION 7
Which two descriptions of a Fabricpath network are true? (Choose two.)

• A. A leaf node connects to servers.
• B. Leaf nodes can be Layer 3 devices.
• C. A spine node connects to other switch in the fabric.
• D. There is a spanning tree protocol running between leaf and spine switches
• E. A spine node connects to servers.

Answer: BD

NEW QUESTION 8
Which ports are used for SIP calling on the Expressway?

• A. 164 and 323
• B. 5060 and 5061
• C. 1719 and 1720
• D. 80 and 443

Answer: B

NEW QUESTION 9
A network engineer wants to apply for new license key file. Which command should be used to obtain the switch serial number?

• A. MDS-A# show license serial-number
• B. MDS- A# show running-config | include serial-number
• C. MDS- A# show host-id
• D. MDS- A# show license host-id

Answer: D

NEW QUESTION 10
In fiber Channel networking, the FCID composed of which of the following?

• A. VSANID, area ID, port ID
• B. domain ID, zone ID, port ID
• C. domain ID, area ID, port ID
• D. VSAN ID, zone ID, port ID

Answer: D

NEW QUESTION 11
What are three reasons that switches supersede bridges? (Choose three.)

• A. Smaller frame buffers decrease latency.
• B. Forward, filter, or flood frames.
• C. Multiple simultaneous communications between ports.
• D. Larger inspection engine allows for higher throughput.
• E. Switches have many ports.

Answer: BCE

Explanation: http://docwiki.cisco.com/wiki/Bridging_and_Switching_Basics

NEW QUESTION 12
Which conferencing solution is designed for messaging, meeting, calling and persistent content sharing?

• A. CMR
• B. Spark
• C. Cisco Meeting Server
• D. Telepresence Server

Answer: B

NEW QUESTION 13
What protocol is used by TMS when a system cannot be contacted using SNMP?

• A. H.245
• B. https
• C. H 239
• D. TIP

Answer: B

NEW QUESTION 14
Which two features must be licensed on a Cisco Nexus 7000 Switch? (Choose two)

• A. Virtual Port Channel
• B. Layer 3
• C. Virtual Device Contexts
• D. iSCSI
• E. Fibre Channel

Answer: BC

Explanation: Layer 3 license - Enterprise Services Package - LAN_ENTERPRISE_SERVICES_PKG
Virtual Device Contexts license - Advanced Services Package -LAN_ADVANCED_SERVICES_PKG
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/licensing/guide/b
_Cisco_NX-OS_Licensing_Guide/b_Cisco_NX-OS_Licensing_Guide_chapter_01.html

NEW QUESTION 15
Which three options describe routers compared to switches? (Choose three.)

• A. use IP address tables for information lookup
• B. concerned with packet forwarding
• C. operate at Layer 3 of the OSI model
• D. operate at Layer 2 of the OSI model
• E. use MAC address tables for information lookup
• F. concerned with the local delivery of frames

Answer: ABC

NEW QUESTION 16
Which is included in an endpoint's registration request message sent to a SIP Server?

• A. E 164 URI
• B. E 164 address
• C. SIP Server IP address
• D. Endpoint IP address

Answer: C

NEW QUESTION 17
Which conferencing solution is designed for scalable meetings, training and events?

• A. Spark
• B. Telepresence Server
• C. Cisco Meeting Server
• D. Cisco WebEx

Answer: D

NEW QUESTION 18
A network uses on pair of Layer 3 switches for core and distribution purposes. Which design is this network using?

• A. collapsed core
• B. collapsed distribution
• C. collapsed Layer 3 core
• D. collapsed Layer 2-3

Answer: A

NEW QUESTION 19
When writing new App in Tropo, in what format should the App Script be saved/

• A. .xml
• B. .json
• C. .js
• D. .mp4

Answer: C