Implementing Cisco Wireless Network Fundamentals 200-355 review has recently been published at Ucertify for years. Utilizing Ucertify 200-355 test out concerns, you are able to complete quality in the initial endeavor. In any other case, you can obtain a money back refund. Ucertify presents equally Pdf as well as test out generator regarding 200-355 review. You may acquire totally free Cisco 200-355 simulated by yourself from our web site directly. You can check your user interface, Cisco 200-355 concerns high quality as well as usablity of our own practice review when you obtain them. If you are surfing around your Cisco 200-355 review as well as 200-355 for all of our web site as well as fulfill some troubles, please talk to all of our on the net livesupport.

2021 Mar 200-355 exam answers

Q111. What is the equivalent of 26 dBm in milliwatts? 

A. 4 mW 

B. 40 mW 

C. 100 mW 

D. 400 mW 

E. 1000 mW 

Answer: D 


Q112. In the current RF environment, the noise floor is -95 dBm. A tablet needs an SNR of 25 dB to transmit at the required speed. What must the RSSI cell edge be to meet the required SNR? 

A. -120 dBm 

B. -90 dBm 

C. -70 dBm 

D. -60 dBm 

E. -50 dBm 

Answer: C 


Q113. What are four features of WPA? (Choose four.) 

A. a larger initialization vector, increased to 48 bits 

B. a message integrity check protocol to prevent forgeries 

C. authenticated key management using 802.1X 

D. support for a key caching mechanism 

E. unicast and broadcast key management 

F. requires AES-CCMP 

Answer: A,B,C,E 


Q114. A network engineer is upgrading the WLC image through the GUI for maintenance. What three transfer methods are available? (Choose three.) 

A. FTP 

B. SNMP 

C. TFTP 

D. SFTP 

E. HTTP 

F. SMB 

G. HTTPS 

H. SCP 

Answer: A,C,D 


Q115. Which three severity levels are in the Cisco WCS alarm dashboard? (Choose three.) 

A. Critical 

B. Flash 

C. Major 

D. Minor 

E. Trivial 

F. Urgent 

Answer: A,C,D 


Renew 200-355 study guide:

Q116. An engineer wants to have users who connect to a WLAN be redirected to a terms-of-service page with the company logo and a login. What should be configured on the WLAN to enable this capability? 

A. Layer 2 IEEE 802.1x 

B. Web Policy Slash Page Web Redirect 

C. Web Policy Authentication 

D. AAA Servers 

E. Web Policy Passthrough 

Answer: C 


Q117. An access point is currently transmitting at 4 mW. The customer needs to increase its signal strength by 6 dB to create a larger wireless cell. What should the new transmit power be? 

A. 8 mW 

B. 10 mW 

C. 12 mW 

D. 16 mW 

E. 24 mW 

Answer: D 


Q118. When a client associates to ExamSSlD, which network address will be assigned? 

A. The IP address assigned will be based on the AP network assignment of 10.10.10.0. 

B. The IP address assigned will be based on the AP network assignment of 172.16.23.0. 

C. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0 address pools. 

D. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 192.168.14.0,192.168.25.0 pools. 

E. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0,192.168.25.0 pools. 

Answer: D 


Q119. Which IEEE 802.11n client feature can combine the signal from multiple antennas and radio chains to improve SNR? 

A. channel aggregation 

B. spatial multiplexing 

C. MAC layer efficiency 

D. TxBF 

E. MRC 

F. MCS 

Answer: E 


Q120. All equipment is operational. Through which two methods can a wireless client receive an IP address when associating to the WLAN? (Choose two.) 

A. The clients can receive an IP address from SW1. 

B. Tie clients can receive an IP address from WLC1. 

C. The clients will not receive an IP address from either DHCP server because of overlapping address ranges. 

D. The clients can receive an IP address in a round-robin maner from either SW1 or WLC1. 

E. The clients can use a static IP address. 

Answer: B,E