Guaranteed of 300 075 vce exam engine materials and bootcamp for Cisco certification for consumer, Real Success Guaranteed with Updated 300 075 ciptv2 pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!

Q31. Refer to the exhibit 

When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised? 

A. 2XXX and the T0D1D will be 0:+498950555 

B. 2XXX and the ToDID will be 0:+4989531 21 

C. 4989S05552XXX and the ToDiD will be 0: 

D. + 4989631 21 2XXX and the ToDiD will be 0: 

E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0: 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fscallcontrol discovery.html 


Q32. The relationship between a Region and a Location is that the Region codec parameter is combined with Location bandwidth when communicating with other Regions. 

A. FALSE 

B. TRUE 

Answer:

Explanation: 

Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331 


Q33. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html 


Q34. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.) 

A. mls qos map cos-dscp 0 10 18 26 34 46 48 56 

B. mls qos map dscp-cos 8 10 to 2 

C. mls qos 

D. interface Fastethernet0/1mls qos trust cos 

E. interface Fastethernet0/1mls qos cos 1 

F. interface Fastethernet0/2mls qos cos 1 

Answer: A,C,D 


Q35. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly. 

What is causing this failure? 

A. Device Pool cannot be default. 

B. The DX650 is the incorrect calling search space. 

C. The DX650 Phones does not support SIP. 

D. The location Hub_None has not been activated. 

E. The DX650’s MAC address is incorrect in the Cisco UCM. 

Answer:

Explanation: 

From the screen capture below we can see that the DX650 phone’s MAC address was incorrectly entered as D0C78914131D, not D0C78914132D. 


Q36. Which two actions are performed by the Call Control Discovery service after the local Cisco Unified Communications Manager loses its TCP connection with the primary and secondary Service Advertisement Framework? (Choose two.) 

A. Calls are routed to the PSTN gateway after the Call Control Discovery Learned Pattern IP Reachable Duration parameter expires. 

B. All learned patterns are purged from the local cache after the Call Control Discovery PSTN Failover Duration parameter expires. 

C. The Service Advertisement Framework forwarder contacts all the remaining Service Advertisement Framework forwarders in the cluster. 

D. All the remaining Service Advertisement Framework forwarders are notified for their learned patterns. 

E. The Cisco Unified Communications Manager establishes a connection with the primary and secondary Service Advertisement Framework after the Learned Pattern IP Reachable Duration parameter expires. 

F. Call Control Discovery immediately redirects all the calls to the PSTN gateway based on the learned patterns. 

Answer: A,B 


Q37. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

What should the AAR group prefix be? 

A. 9 

B. 91 

C. none 

D. + 

E. +1 

Answer:


Q38. Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC? 

A. Configure AAR in Cisco Unified Communications Manager. 

B. Configure CFUR in Cisco Unified Communications Manager. 

C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager. 

D. Configure a route pattern to a gateway in Cisco Unified Communications Manager. 

Answer:


Q39. Refer to the exhibit. 

You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly? 

A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command. 

B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command. 

C. The sccp ccm group number needs to match the associate ccm 2 command. 

D. The maximum sessions command must match the number of codecs configured under the dsp farm profile. 

E. The sccp ccm group number must match the voice-card number. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtr ns.html 


Q40. Which two features require or may require configuring a SIP trunk? (Choose two.) 

A. SIP gateway 

B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express 

C. Cisco Device Mobility 

D. Cisco Unified Mobility 

E. registering a SIP phone 

Answer: A,B 

Explanation: 

Incorrect Answer: C, D, E All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones, such as cellular phones. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html# wpxref77849