Your success in Cisco 300-365 is our sole target and we develop all our 300-365 braindumps in a way that facilitates the attainment of this target. Not only is our 300-365 study material the best you can find, it is also the most detailed and the most updated. 300-365 Practice Exams for Cisco CCNP Wireless 300-365 are written to the highest standards of technical accuracy.

Q1. An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical operating mode must the engineer plan on for normal operations? 

A. local authentication, local switching 

B. central authentication, central switching 

C. central authentication, local switching 

D. connected mode 

Answer:


Q2. A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured. How many image transfers between the WLC and APs will occur? 

A. 7 

B. 1 

C. 5 

D. 2 

Answer:


Q3. A customer has "quiet" wireless clients that use static IP addresses. Which two WLAN configurations are required for these wireless clients to connect properly? (Choose two.) 

A. Disable DHCP address assignment required. 

B. Enable passive client. 

C. Disable allow AAA override. 

D. Enable static IP tunneling. 

E. Disable DHCP server override. 

Answer: A,E 


Q4. A network engineer is configuring QoS and sees a DSCP value of 40. To which CoS value will this be mapped? 

A. 4 

B. 3 

C. 5 

D. 2 

E. 1 

Answer:


Q5. Which network is connected by default when connecting to the unused Ethernet port of a MAP? 

A. the native VLAN that the MAP is connected to 

B. the VLAN that is associated with WLAN number 1 in the WLC 

C. the native VLAN that the WLC is connected to 

D. the VLAN that is associated with the SSID that the MAPs are communicating on 

Answer:


Q6. CORRECT TEXT 

Scenario 

One of your colleagues has setup a test network in the lab to simulate a new building atone of your regional offices. Your team is testing AP failover. Your colleague has requested you to configure the WLCs so that in the event of a loss of one of the WLCsthe other wings APs will fail over to the remaining WLC. 

The APs on the East-WLC-2504A should fail over to the West-WLC2-2504A, and the APs on the West-WLC2-2504A should fail over to the East-WLC-2504A. 

Set the priority of the APs so the backup controller recognizes the join request from the higher-priority AP and if necessary disassociates a lower-priority AP to provide access to an available port. 

Not all menus, tabs and features are supported. 

Topology 

Answer: 


Q7. On which AP radio or radios is Cisco WGB association supported? 

A. 2.4 GHz only 

B. 2.4 or 5 GHz only 

C. 2.4, 5, or 4.9 GHz 

D. 5 GHz only 

Answer:


Q8. When a Vocera badge performs a broadcast call in a properly configured VoWLAN using WLC v7.0, which two choices indicate how the QoS is marked? (Choose two.) 

A. Upstream marked as Best Effort. 

B. Upstream marked as ToS CS4. 

C. Upstream marked as DSCP EF. 

D. Downstream marked as DSCP EF. 

E. Downstream marked as Best Effort. 

F. Downstream marked as Silver. 

Answer: C,E