we provide Highest Quality Microsoft mcp 70 410 exam topics which are the best for clearing 70 410 study guide pdf test, and to get certified by Microsoft Installing and Configuring Windows Server 2012. The 70 410 vce Questions & Answers covers all the knowledge points of the real mcp 70 410 exam. Crack your Microsoft microsoft 70 410 Exam with latest dumps, guaranteed!

Q71. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have 

Windows Server 2012 installed. 

You are running a training exercise for junior administrators. You are currently discussing NIC Teaming. 

Which of the following is TRUE with regards to NIC Teaming? (Choose all that apply.) 

A. It allows for traffic failover to prevent connectivity loss if a network component fails. 

B. It prevents bandwidth aggregation. 

C. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 5 NICs in a team. 

D. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 32 NICs in a team. 

Answer: A,D 

Explanation: 

NIC teaming, also known as Load Balancing/Failover (LBFO), allows multiple network adapters to be placed into a team for the purposes of bandwidth aggregation, and/or traffic failover to maintain connectivity in the event of a network component failure. This feature has long been available from NIC vendors but until now NIC teaming has not been included with Windows Server. Do I have to select a standby member to get fault tolerance (failover)? No. IN any team with two or more network adapters if a network adapter fails in an Active/Active configuration, the traffic on that network adapter will gracefully failover to the other network adapters in the team even if none of the other adapters are in standby mode. Number of NICs in a team in a native host NIC teaming requires the presence of at least one Ethernet NIC. A team of one NIC may be used for separation of traffic using VLANs. Obviously a team with only one team member has no failure protection. Fault protection (failover) requires a minimum of two Ethernet NICs in the team. The Windows Server 2012 implementation supports up to 32 NICs in a team. Number of team interfaces for a team Windows Server 2012 supports up to 32 team interfaces. 


Q72. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

You are running a training exercise for junior administrators. You are currently discussing the use of Non-Uniform Memory Architecture (NUMA). 

Which of the following is TRUE with regards to Non-Uniform Memory Architecture (NUMA)? (Choose two.) 

A. It is a computer architecture used in multiprocessor systems. 

B. It is a computer architecture used in single processor systems. 

C. It allows a processor to access local memory faster than it can access remote memory. 

D. It allows a processor to access remote memory faster than it can access local memory. 

Answer: A,C 

Explanation: 

NUMA is a hardware design feature that divides CPUs and memory in a physical server into NUMA nodes. You get the best performance when a process uses memory and CPU from within the same NUMA node. de is full, then it’ll get memory from When a process requires more memory, but the current NUMA no another NUMA node and that comes at a performance cost to that process, and possibly all other processes on that physical server. And that’s why virtualization engineers need to be aware of this. In Hyper-V we have Dynamic Memory. Non-Uniform Memory Access or Non-Uniform Memory Architecture (NUMA) is a computer memory design used in multiprocessors, where the memory access time depends on the memory location relative to a processor. Under ccNUMA, a processor can access its own local memory faster than non-local memory, that is, memory local to another processor or memory shared between processors. NUMA architectures logically follow in scaling from symmetric multiprocessing (SMP) architectures. 


Q73. - (Topic 1) 

Your network contains a server named Server1 that runs Windows Server 2012 

R2.Server1 has the Hyper-V server role installed. 

Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. 

Server1 is configured as shown in the following table. 

VM2 sends and receives large amounts of data over the network. 

You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition. 

What should you configure? 

A. NUMA topology 

B. Resource control 

C. resource metering 

D. virtual Machine Chimney 

E. The VLAN ID 

F. Processor Compatibility 

G. The startup order 

H. Automatic Start Action 

I. Integration Services 

J. Port mirroring 

K. Single-root I/O virtualization 

Answer:

Explanation: 

Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic. 

References: 

http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx 

Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335 


Q74. HOTSPOT - (Topic 3) 

You have a Server Core 2012 installation and all roles and features removed. The server does not haveaccess to Windows Update. You mount the network volume containing the installation files for Server 2012. 

You need to install DNS and DHCP server role. 

Which directory do you reference for installing? 

Answer: 


Q75. - (Topic 2) 

You have a new server named Server1 that runs Windows Server 2012 R2. 

Server1 has two dual-core processors and 32 GB of RAM. 

You install the Hyper-V server role on Server1. 

You create two virtual machines on Server1 that each have 8 GB of memory. 

You need to minimize the amount of time it takes for both virtual machines to access 

memory. 

What should you configure on each virtual machine? 

A. Resource control 

B. Memory weight 

C. Dynamic Memory 

D. NUMA topology 

Answer:

Explanation: 

Windows Server 2012 introduced support for projecting a virtual NUMA topology into Hyper-V virtual machines. This capability can help improve the performance of workloads running on virtual machines that are configured with large amounts of memory. 


Q76. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 2012. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1? 

A. From a command prompt, run sc.exe and specify the config parameter. 

B. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter 

C. From Windows PowerShell,run Set-Service and specify the -StartupType parameter 

D. From Services Console configure the General settings 

Answer:


Q77. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

Contoso.com has a server, named ENSUREPASS-SR13. ENSUREPASS-SR13 hosts a shared folder, named ENSUREPASSShare, which has been shared as ENSUREPASSShare$. 

Which of the following is TRUE with regards to sharing the folder in this manner? 

A. It allows all users to view ENSUREPASSShare when browsing the network. 

B. It prevents users from viewing ENSUREPASSShare when browsing the network. 

C. It only allows ENSUREPASS-SR13’s users to view ENSUREPASSShare. 

D. It removes the permissions configured for ENSUREPASSShare. 

Answer:


Q78. HOTSPOT - (Topic 2) 

You have a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a folder named Folder1. 

A user named User1 is a member of Group1 and Group2. A user named User2 is a 

member of Group2 and Group3. 

You need to identify which actions the users can perform when they access the files in 

Share1. 

What should you identify? 

To answer, select the appropriate actions for each user in the answer area. 

Answer: 


Q79. - (Topic 3) 

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2. 

Your company uses smart cards for authentication. 

You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection. 

What should you configure? 

A. The RemoteFX settings 

B. The Enhanced Session Mode Policy 

C. The NUMA Spanning settings 

D. The Integration Services settings 

Answer:


Q80. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed. 

You are running a training exercise for junior administrators. You are currently discussing spanned volumes. 

Which of the following is TRUE with regards to spanned volumes? (Choose all that apply.) 

A. Spanned volumes do not provide fault tolerance. 

B. Spanned volumes are a fault tolerant solution. 

C. You can extend a spanned volume onto a maximum of 16 dynamic disks. 

D. You cannot create a spanned volume using a system volume or boot volume. 

Answer: A,D 

Explanation: 

A spanned volume is a dynamic volume consisting of disk space on more than one physical disk. If a simple volume is not a system volume or boot volume, you can extend it across additional disks (up to 32 total) to create a spanned volume, or you can create a spanned volume in unallocated space on a dynamic disk. You need at least two dynamic disks in addition to the startup disk to create a spanned volume. You can extend a spanned volume onto a maximum of 32 dynamic disks. Spanned volumes are not fault tolerant.