Practical of HP0-S42 free question materials and study guides for HP certification for consumer, Real Success Guaranteed with Updated HP0-S42 pdf dumps vce Materials. 100% PASS Architecting HP Server Solutions exam Today!
2021 Sep HP0-S42 training
Q21. What are the two initial modes offered by Intelligent Provisioning? (Select two)
A. Perform maintenance
B. Configure and install
C. Reset to factory state
D. Boot Order menu
E. System ROM setup
Answer: A,B
Reference: http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisp lay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDispl ayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay =wsrp-resourceState%3DdocId%253Demr_na-c03182305-8%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken (page 7)
Q22. When an HP ProLiant BL460c Generation 8 server is configured with a FlexNIC, the PCI-e devices’ port speeds can be set using increments of which size?
A. 1 GB
B. 10 GB
C. 100 MB
D. 10 MB
Answer: C
Reference: http://h18004.www1.hp.com/products/quickspecs/13127_div/13127_div.html (At A Glance, 4th bulleted point)
Q23. What is purpose of conducting a customer site survey?
A. Identify the types of servers that will be included in the solution.
B. Identify the customer’s business goals for the solution.
C. Determine the different workloads the customer is running.
D. Assess the facility and its suitability for the proposed solution.
Answer: D
Q24. A customer’s data center has grown 2% annually and is expected to continue to grow. Their staffing levels have not grown. Their data center administrators monitor, manage, and control UPSs locally and remotely.
Which HP web-based application supports the administrator job tasks?
A. HP Power Advisor
B. HP Capacity Advisor
C. HP Power Protector
D. HP Sea of Sensors
Answer: C
Reference: http://h18004.www1.hp.com/products/quickspecs/14070_div/14070_div.pdf (first para, on page 1)
Q25. You are designing an HP ProLiant BladeSystem with Virtual Connect FlexFabric and HP 3PAR StoreServ 3400c. The customer is concerned about the added complexity of including SAN switches and the additional SAN management overhead. Which HP technology should you recommend?
A. HP B-Series SAN Network Advisor
B. HP FlexFabric 20Gb 2-port 650 Adapter
C. Virtual Connect Flat SAN
D. HP FlexFabric 5930 Switch Series
Answer: C
Avant-garde HP0-S42 answers:
Q26. HP SmartMemory LRDIMM offers which benefits? (Select two)
A. Reduces loading on the memory data bus
B. Supports 1.8 V operation
C. Combines with RDIMMs
D. Enables higher capacity DIMMs
Answer: A,D
Explanation:
LRDIMM or Load Reduced DIMM is an industry standard memory technology that has been adopted by Intel for their next generation Intel. Xeon. E5-2600 family processor that addresses the need for greater memory bandwidth and capacity. LRDIMM memory buffer reduces the electrical load to the memory controller and allows higher capacity memory to run at 3 DIMMs per channel. LRDIMM is for customers who require the maximum memory capacity.
Q27. A customer needs to protect their data and requires less rebuild time in case of drive failure. You recognize an opportunity to offer RAID 50 protection. What is the minimum number of disks needed to support this solution?
A. 3
B. 5
C. 6
D. 10
Answer: C
Reference: http://www.acnc.com/raidedu/50 (see the sentence under the main image at the top)
Q28. Which tool can be used to reset an HP ProLiant Gen9 server to factory defaults and remove all data from the Local hard drives?
A. Onboard Administrator
B. HP ILO
C. SmartStart CD
D. Intelligent Provisioning
Answer: D
Q29. A customer needs to manage and maintain the operation of a large hyperscale cluster of a SL based servers. The customer needs to run a set of operating system commands and execute them from within the operating system on all the SL servers. Which method should the customer use?
A. Execute the commands from the Cluster Management Utility on all of the servers
B. Create a script and use the RESTful interface tool to execute the commands on all of the servers
C. Boot HP SUM on one SL node and use iLO federation to execute the commands on all of the servers
D. Use HP SUM CLI online from within the SL operating system and execute the commands by using multicast
Answer: B
Q30. Which data can Insight Control deliver to Microsoft System Center?
A. Linux performance monitoring
B. Microsoft Service Pack status
C. Detailed HP inventory
D. HP Version Control
Answer: C
Reference: http://h18013.www1.hp.com/products/servers/management/integration-msc.html (second paragraph)