we provide Printable Network Appliance NS0-180 brain dumps which are the best for clearing NS0-180 test, and to get certified by Network Appliance NetApp Certified Storage Installation Engineer, Clustered Data ONTAP. The NS0-180 Questions & Answers covers all the knowledge points of the real NS0-180 exam. Crack your Network Appliance NS0-180 Exam with latest dumps, guaranteed!
Q33. Click the exhibit button.
You are installing a FAS2254 and a DS2246 disk shelf at a customer's site. The controller and disk shelf must be racked in separate rows in the data center due to available space. The customer wants you to use two of the 20-meter copper SAS cables to make connections.
Referring to the exhibit, which statement is correct?
A. You will need to contract sales to obtain a wireless adapter.
B. You will need to contract sales to obtain the 20 meter copper cables.
C. The controller and disk shelf must be closer together if copper cables are to be used.
D. You will need to contact sales to obtain an Ethernet adapter.
Answer: C
Explanation:
According to the exhibit the maximum copper cable length that can be used is 5 meters.
Q34. A customer is installing a new system. The administrator needs to have the maximum available amount of data space.
Which disk configuration should the administrator use?
A. RAID-DP
B. RAID4
C. Flash Pool
D. ADP
Answer: D
Explanation:
Advanced drive partitioning to increase usable capacity for entry systems, all-flash FAS,
and Flash Pool.
Incorrect: Not A: RAID-DP is useful for maximizing data protection, but it does not provide
the maximum available data space. Not B: RAID4 is useful for optimizing writes, but it does
not provide the maximum available data space.
Reference:
http://community.netapp.com/t5/Tech-OnTap-Articles/Clustered-Data-ONTAP-8-3-A-Proven-Foundation-for-Hybrid-Cloud/ta-p/92703
Q35. What network information is required to set up any Cisco switches attached to a clustered Data ONTAP system? (Choose two.)
A. All management ports configured for e0d or the service port (wrench icon) are required.
B. VLAN tags for each interface are required.
C. Host names and IP addresses for each of the controllers and configured switches are required.
D. The appropriate number and type of cables and cable connectors for your switches are required.
Answer: C,D
Explanation:
C: You need the following network information for all switch configurations: *Two or more IP subnet addresses for cluster network and management network traffic Host names and IP addresses for each of the controllers and all applicable switches Management network port assignments for your controller
D: To configure your cluster, you need the appropriate number and type of cables and cable connectors for your switches. Depending on the type of switch you are initially configuring, you need to connect to the switch console port with the included console cable.
Reference: Clustered Switch Setup Guide for Cisco Switches, page 8
https://library.netapp.com/ecm/ecm_download_file/ECMP1115327
Q36. A customer has a six-node cluster running NFS and FCP. The customer wants to add nodes to the cluster.
How many nodes would be added in this scenario?
A. 18
B. 4
C. 6
D. 2
Answer: D
Q37. Which NetApp tool will simplify your initial system installation?
A. OnCommand Unified Manager
B. OnCommand System Manager
C. Config Advisor
D. System Setup tool
Answer: D
Explanation:
The System Setup tool enables you to quickly and easily set up your netapp FAS series storage systems using NetApp best practices and optimizing performance for Clustered. You can use this software to configure your network, storage, and protocols with either a single storage controller or multiple controllers. Incorrect: Not A: OnCommand Unified Manager is used for to monitor the health of your clustered Data ONTAP environment. Not B: The System Setup tool is for the initial configuration, while OnCommand System Manager is for later configuration. The OnCommand System Manager provides fast, simple configuration and management for NetApp FAS storage systems. Not C: Config Advisor is run on already installed systems. It performs configuration validation for new NetApp system installation and improve automation for service delivery for assessments and audits.
Reference:http://mysupport.netapp.com/NOW/public/system_setup/
Q38. You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?
A. You cannot install five SSD shelves to one System.
B. You need at least two stacks.
C. You need at least three stacks.
D. You can put all shelves in one stack.
Answer: D
Explanation:
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s). Reference: Making the Move from FC to SAS Storage
http://www.netapp.com/as/communities/tech-ontap/tot-fc-sas-1101-as.aspx
Q39. While testing storage failover, you receive an error message indicating that you have a disk inventory mismatch.
What is a reason for the error message?
A. unsupported disks
B. cabling problems
C. Flash Cache problems
D. unowned disks
Answer: D