It is more faster and easier to pass the Network Appliance NS0-502 exam by using Virtual Network Appliance NetApp Certified Implementation Engineer-SAN and Virtualization questuins and answers. Immediate access to the Up to the immediate present NS0-502 Exam and find the same core area NS0-502 questions with professionally verified answers, then PASS your exam with a high score now.
Q1. You are about to replace a failed Brocade Fibre Channel switch. Which three steps do you take prior to connecting the switch in the SAN? (Choose three.)
A. Force the new switch to be the principle switch.
B. Change the domain ID of the replacement switch to the domain ID of the failed switch.
C. Clear all zoning configurations on the replacement switch.
D. Change the core PID format of the replacement switch to the core PID format of the failed switch.
E. Preload the zoning information from the fabric onto the new switch.
Answer: BCD
Q2. Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D
Q3. Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C
Q4. Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
Q5. You are creating an acceptance test plan and the subject of performance is raised. How should you define what the minimum performance should be?
A. You should look up the test results for a similar system in previous performance testing and use those numbers.
B. You should work with the customer to understand their performance expectations and determine the minimum performance they require for the application this system will support.
C. You should use the published maximum performance specifications for this system.
D. You should use the published minimum performance specifications for this system.
Answer: B
Q6. Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol. Based on the information provided in the table, which action will the storage controller take when it runs out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C
Q7. A company is planning to use physical Raw Device Mappings (RDMs) in their ESX environment. Which LUN type should they use on the NetApp storage system if they want to prevent LUN I/O alignment issues?
A. They should use the VMware LUN type.
B. They should use the LUN type matching the guest operating system.
C. ESX will automatically align I/O on WAFL boundaries if NetApp host utilities is installed.
D. Any UNIX LUN type will work since it is an RDM.
Answer: B
Q8. Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the WWPN of the old HBA.
Answer: D