Act now and download your Fortinet nse4 fortinet test today! Do not waste time for the worthless Fortinet nse4 exam tutorials. Download Leading Fortinet Fortinet Network Security Expert 4 Written Exam (400) exam with real questions and answers and begin to learn Fortinet nse4 dumps with a classic professional.

Q1. - (Topic 12) 

A FortiGate is configured with multiple VDOMs. An administrative account on the device has been assigned a Scope value of VDOM:root. 

Which of the following settings will this administrator be able to configure? (Choose two.) 

A. Firewall addresses. 

B. DHCP servers. 

C. FortiGuard Distribution Network configuration. 

D. System hostname. 

Answer: A,B 


Q2. - (Topic 15) 

Which statement is an advantage of using a hub and spoke IPsec VPN configuration 

instead of a fully-meshed set of IPsec tunnels? 

A. Using a hub and spoke topology provides full redundancy. 

B. Using a hub and spoke topology requires fewer tunnels. 

C. Using a hub and spoke topology uses stronger encryption protocols. 

D. Using a hub and spoke topology requires more routes. 

Answer:


Q3. - (Topic 7) 

Which antivirus inspection mode must be used to scan SMTP, FTP, POP3 and SMB protocols? 

A. Proxy-based. 

B. DNS-based. 

C. Flow-based. 

D. Man-in-the-middle. 

Answer:


Q4. - (Topic 14) 

In a high availability cluster operating in active-active mode, which of the following correctly describes the path taken by the SYN packet of an HTTP session that is offloaded to a slave unit? 

A. Request: internal host; slave FortiGate; master FortiGate; Internet; web server. 

B. Request: internal host; slave FortiGate; Internet; web server. 

C. Request: internal host; slave FortiGate; master FortiGate; Internet; web server. 

D. Request: internal host; master FortiGate; slave FortiGate; Internet; web server. 

Answer:


Q5. - (Topic 3) 

Examine the following CLI configuration: config system session-ttl set default 1800 end What statement is true about the effect of the above configuration line? 

A. Sessions can be idle for no more than 1800 seconds. 

B. The maximum length of time a session can be open is 1800 seconds. 

C. After 1800 seconds, the end user must re-authenticate. 

D. After a session has been open for 1800 seconds, the FortiGate sends a keepalive packet to both client and server. 

Answer:


Q6. - (Topic 20) 

Examine at the output below from the diagnose sys top command: # diagnose sys top 1 Run Time: 11 days, 3 hours and 29 minutes 0U, 0N, 1S, 99I; 971T, 528F, 160KF sshd 123 S 1.9 1.2 ipsengine 61 S < 0.0 5.2 miglogd 45 S 0.0 4.9 

pyfcgid 75 S 0.0 4.5 

pyfcgid 73 S 0.0 3.9 

Which statements are true regarding the output above? (Choose two.) 

A. The sshd process is the one consuming most CPU. 

B. The sshd process is using 123 pages of memory. 

C. The command diagnose sys kill miglogd will restart the miglogd process. 

D. All the processes listed are in sleeping state. 

Answer: A,D 


Q7. - (Topic 11) 

Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it. config router static edit 1 set dst 172.20.168.0 255.255.255.0 set distance 20 set priority 10 set device port1 next edit 2 set dst 172.20.168.0 255.255.255.0 set distance 20 set priority 20 set device port2 

next 

end 

Which of the following statements correctly describes the static routing configuration provided above? 

A. The FortiGate evenly shares the traffic to 172.20.168.0/24 through both routes. 

B. The FortiGate shares the traffic to 172.20.168.0/24 through both routes, but the port2 route will carry approximately twice as much of the traffic. 

C. The FortiGate sends all the traffic to 172.20.168.0/24 through port1. 

D. Only the route that is using port1 will show up in the routing table. 

Answer:


Q8. - (Topic 17) 

Which statement describes what the CLI command diagnose debug authd fsso list is used for? 

A. Monitors communications between the FSSO collector agent and FortiGate unit. 

B. Displays which users are currently logged on using FSSO. 

C. Displays a listing of all connected FSSO collector agents. 

D. Lists all DC Agents installed on all domain controllers. 

Answer: