Testking offers free demo for ns0-507 exam. "NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP", also known as ns0-507 exam, is a Network Appliance Certification. This set of posts, Passing the Network Appliance ns0-507 exam, will help you answer those questions. The ns0-507 Questions & Answers covers all the knowledge points of the real exam. 100% real Network Appliance ns0-507 exams and revised by experts!

Q25. Which three components must be verified in the IMT to ensure a support FC configuration? (Choose three.)

A. The FC HBA that is installed in the host

B. The OS patch level or service pack

C. The volume manager that is being used on the host

D. The size and quantity of the internal disks

E. The amount of memory that is installed in the host

Answer: A,B,C


Q26. A company has Snapmirror configured between two ONTAP clusters. They want to add nodes to one of the clusters at a minimum, which LIF would be required to be defined on

the new nodes?

A. Node-management, data, and intercluster

B. Node-management and intercluster

C. Data, node-management, and FC

D. Node-management

Answer: C


Q27. A customer has four SVMs on a 4-node cluster. Each SVM has two FC LIFs per node, for a total of eight LIFs per node.

According to Netapp Best practices, what is the minimum number of ports required per node for this configuration?

A. 16

B. 4

C. 8

D. 2

Answer: D


Q28. You are asked to configure the Service Processor on a newly installed node, and must verify the following command:

system-service processor network modify –node local –address-family IPv4 –enable true - ip-address 192.168.123.98 –netmask 255.255.255.0

Which statement about this command is true?

A. –nodeshould reference the actual node name.

B. The gateway IP address is missing.

C. The Link Local IP Address is missing.

D. IPv6 is required for the SP.

Answer: A,B


Q29. You have 4-node cluster with a FAS8200 HA pair and AFF A700 HA PAIR. You need to move a LUN from the FAS8200 to the AFF A700 for faster performance.

In this scenario, which sequence of steps, accomplishes task nondisruptively?

A. 1. Remove the FAS8200 HA pair from file reporting-nodes list. 2. Add the AFF-A700 HA pair to the reporting nodes list. 3. Run the lun move command.

B. 1. Add the AFF A700 HA pair to the reporting-nodes list. 2. Run the lun move command.

3. Remove the FAS8200 HA pair from the reporting-nodes list.

C. 1. Run the lun move command.2. Add the AFF A700 H pair to the repotting-nodes list. 3. Remove the FAS8200 HA pair from the reporting-nodes.

D. 1. Add the AFF A700 HA pair to the reporting-nodes list. 2. Remove the FAS8200 HA pair from the reporting-nodes list. 3. Run the lun move command

Answer: B


Q30. You have a host with multiple initiator ports attaching to a single SAN LIF.

With this setup, which action is required?

A. You must use host multipathing software.

B. You must use an individual SAN LIF for each initiator port.

C. You must use a portset.

D. You must use a SAN LIF failover group.

Answer: B


Q31. You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+.

In this scenario, what is the minimum port speed required on the DR Site’s FC switches?

A. 2 Gb

B. 16 Gb

C. 8 Gb

D. 4 Gb

Answer: B


Q32. When a new LUN is allocated, which volume and LUN configuration will use the smallest amount of storage?

A. Volume guarantee none, fractional reserve 0, space reservation disabled

B. Volume guarantee none, fractional reserve 0, space reservation enabled

C. Volume guarantee volume, fractional reserve 100, space reservation enabled

D. Volume guarantee volume, fractional reserve 100, space reservation enabled

Answer: A