Want to know Certleader 156-915.80 Exam practice test features? Want to lear more about Check Point Check Point Certified Security Expert Update - R80 certification experience? Study Refined Check Point 156-915.80 answers to Abreast of the times 156-915.80 questions at Certleader. Gat a success with an absolute guarantee to pass Check Point 156-915.80 (Check Point Certified Security Expert Update - R80) test on your first attempt.

P.S. Refined 156-915.80 item pool are available on Google Drive, GET MORE: https://drive.google.com/open?id=1kHtvfzv89_QPh4A3_cAnuAFq9mDuP3yP


New Check Point 156-915.80 Exam Dumps Collection (Question 7 - Question 16)

Q1. MegaCorps' disaster recovery plan is past due for an update to the backup and restore section to enjoy the benefits of the new distributed R80 installation. You must propose a plan that meets the following required and desired objectives:

Required: Security Policy repository must be backed up no less frequently than every 24 hours. Desired: Back up R80 components enforcing the Security Policies at least once a week. Desired: Back up R80 logs at least once a week.

You develop a disaster recovery plan proposing the following:

* Use the utility cron to run the command upgrade_export each night on the Security Management Servers.

* Configure the organization's routine backup software to back up files created by the command upgrade_export.

* Configure GAiA back up utility to back up Security Gateways every Saturday night.

* Use the utility cron to run the command upgrade_export each Saturday night on the log servers.

* Configure an automatic, nightly logswitch.

* Configure the organization's routine back up software to back up the switched logs every night. The corporate IT change review committee decides your plan:

A. meets the required objective and only one desired objective.

B. meets the required objective and both desired objectives.

C. meets the rquired objective but does not meet either deisred objective.

D. does not meet the required objective.

Answer: B


Q2. When migrating the SmartEvent data base from one server to another, the last step is to save the files on the new server. Which of the following commands should you run to save the SmartEvent data base files on the new server?

A. cp

B. restore

C. migrate import

D. eva_db_restore

Answer: D


Q3. Fill in the blank. You can set Acceleration to ON or OFF using command syntax .

Answer:

fwaccel off/on


Q4. A Web server behind the Security Gateway is set to Automatic Static NAT. Client side NAT is not checked in the Global Properties. A client on the Internet initiates a session to the Web Server. Assuming there is a rule allowing this traffic, what other configuration must be done to allow the traffic to reach the Web server?

A. Automatic ARP must be unchecked in the Global Properties.

B. Nothing else must be configured.

C. A static route must be added on the Security Gateway to the internal host.

D. A static route for the NAT IP must be added to the Gatewayu2021s upstream router.

Answer: C


Q5. Peter is your new Security Administrator. On his first working day, he is very nervous and enters the wrong password three times. His account is locked. What can be done to unlock Peteru2021s account? Give the BEST answer.

A. You can unlock Peteru2021s account by using the command fwm lock_admin -u Peter on the Security Management Server.

B. You can unlock Peteru2021s account by using the command fwm unlock_admin -u Peter on the Security Management Server

C. It is not possible to unlock Peteru2021s account. You have to install the firewall once again or abstain from Peteru2021s help.

D. You can unlock Peteru2021s account by using the command fwm unlock_admin -u Peter on the Security Gateway.

Answer: A


Q6. Where is it necessary to configure historical records in SmartView Monitor to generate Express reports in SmartReporter?

A. In SmartDashboard, the SmartView Monitor page in the R80 Security Gateway object

B. In SmartReporter, under Express > Network Activity

C. In SmartReporter, under Standard > Custom

D. In SmartView Monitor, under Global Properties > Log and Masters

Answer: A


Q7. Which of the following allows administrators to allow or deny traffic to or from a specific network based on the useru2021s credentials?

A. Access Policy

B. Access Role

C. Access Rule

D. Access Certificate

Answer: B


Q8. John detected high load on sync interface. Which is most recommended solution?

A. For short connections like http service u2013 delay sync for 2 seconds

B. Add a second interface to handle sync traffic

C. For short connections like http service u2013 do not sync

D. For short connections like icmp service u2013 delay sync for 2 seconds

Answer: A


Q9. Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?

A. mgmt_cli add-host u201cServer_1u201d ip_ address u201c10.15.123.10u201d u2013 format txt

B. mgmt_ cli add host name u201cServer_ 1u201d ip-address u201c10.15.123.10u201d u2013 format json

C. mgmt_ cli add object-host u201cServer_ 1u201d ip-address u201c10.15.123.10u201d u2013 format json

D. mgmt_cli add object u201cServer_ 1u201d ip-address u201c10.15.123.10u201d u2013 format json

Answer: B

Explanation: Example:

mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json

u2022 "--format json" is optional. By default the output is presented in plain text.


Q10. GAiA greatly increases operational efficiency by offering an advanced and intuitive software update agent, commonly referred to as the:

A. Check Point Upgrade Service Engine.

B. Check Point Software Update Agent

C. Check Point Remote Installation Daemon (CPRID)

D. Check Point Software Update Daemon

Answer: A


100% Abreast of the times Check Point 156-915.80 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/156-915.80/ (New Q&As)