Simulation 1Y0-402 Free Practice Questions 2021

NEW QUESTION 1
Scenario: A Citrix Architect has designed an active/passive XenApp and XenDesktop environment for a customer, where the passive datacenter serves as the disaster recovery (DR) datacenter for all users.
The following has been configured:
NetScaler Gateways in both datacenters, each with a unique URL
NetScaler load balancing of StoreFront and Delivery Controller XML services
A separate XenApp and XenDesktop Site at each datacenter
Two StoreFront servers deployed in each datacenter aggregating resources from the Delivery Controllers in the respective datacenter
During a disaster recovery strategy review, the IT infrastructure director recommends exploring cloud-based disaster recovery options for the XenApp and XenDesktop environment. The director reminds the team that the new solution would also have to support the following objectives:
The DR environment needs to be fully functional in the event that the primary datacenter goes completely offline.
The DR environment should require minimal operating costs until it is needed to host active user sessions.
In a DR event, active user sessions should connect directly to the resource location without going through additional hops.
The architect develops four different conceptual diagrams to display the current architecture as well as the potential cloud-based DR locations.
Click the Exhibit button to view the conceptual diagrams.


Based on the diagrams and above requirements, which Site architecture should the architect use?

• A. Option 4
• B. Option 2
• C. Option 3
• D. Option 1

Answer: D

NEW QUESTION 2
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. While designing Universal Print server (UPS) for the customer, the architect is asked to ensure that the UPS design can handle 500 simultaneous print jobs per minute.
What must the architect deploy to support the load estimated by the customer?

• A. Two UPS servers and configure UPS for load balancing policy
• B. Ten UPS servers and configure UPS for load balancing policy
• C. Five UPS servers and configure NetScaler load balancing
• D. Two UPS servers and configure NetScaler load balancing
• E. Five UPS servers and configure UPS for load balancing policy
• F. Ten UPS servers and configure NetScaler load balancing

Answer: E

NEW QUESTION 3
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified the access requirements listed in the Exhibit. Click the Exhibit button to view the requirements.

A single store has already been configured with the following settings, every other setting has been kept as a default.
Username/Password authentication
No resource filtering
NetScaler Gateway is configured for authentication
No IIS redirection
Deploy Receiver 4.10 installer
The architect needs to evaluate whether the current store, which cannot be changed, meets the requirements of the user groups and needs to determine how many additional stores are required.
How many additional StoreFront stores does the architect need to support the requirements shown in the Exhibit?

• A. 1
• B. 4
• C. 3
• D. 5
• E. 2

Answer: E

NEW QUESTION 4
Scenario: A Citrix Architect is investigating a recent change that is impacting system performance of the Provisioning Services farm. However, no actions have been recorded in the Audit Trail.
Which two processes are preventing Provisioning Services auditing from recording the actions? (Choose two.)

• A. The change was completed through the SCCM integration.
• B. A task was performed using Provisioning Services PowerShell interface.
• C. A task was performed using Management Command Line Interface (MCLI).
• D. The Provisioning Services database was unavailable.
• E. Auditing is disabled by default.

Answer: D

NEW QUESTION 5
Scenario: A Citrix Architect is performing a XenApp and XenDesktop design. During a discussion with the server hardware team, two potential network configurations are proposed for the XenServer hosts.
Click the Exhibit button to view the network configurations.


Which statement will support a decision to use Network Configuration 2?

• A. It will ensure that virtual machine workloads do NOT interfere with each other.
• B. It will provide greater security for all traffic types.
• C. It will achieve a higher level of redundancy for the different traffic types.
• D. It will reserve more bandwidth for virtual machine traffic.

Answer: C

NEW QUESTION 6
Scenario: After a recent security assessment, a Citrix Architect recommends blocking unnecessary peripheral types by disabling the associated HDX channels. Currently, the environment is intended to support the peripheral types listed in the Exhibit.
Click the Exhibit button to view the supported peripheral types.

Which four HDX virtual channels should the architect disable, based on the peripherals required in the environment? (Choose four.)

• A. SmartCard
• B. TWI
• C. Print
• D. ClientAudio
• E. GenericUSB
• F. TwainRdr
• G. Multimedia

Answer: ACDE

NEW QUESTION 7
Scenario: A Citrix Architect is designing a XenDesktop environment. The Engineer group uses graphical applications which require the use of Intel Iris Pro GPUs.
Which two hypervisors can the architect select for this environment? (Choose two.)

• A. XenServer 6.5
• B. Microsoft Hyper-V Server 2012 R2
• C. XenServer 7.0
• D. VMware vSphere 5.5
• E. VMware vSphere 6.0

Answer: BE

NEW QUESTION 8
Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.
Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:
Minimize the administrative time required to replicate images between farms
Must be usable by storage administrators without PVS farm administrative permissions
Utilize pre-existing infrastructure and processes where possible
Which method should the architect use to replicate the vDisk files between datacenters?

• A. Scheduled robocopy commands
• B. vDisk Replicator Tool
• C. Microsoft DFS-R
• D. Manual copy
• E. SAN replication

Answer: B

NEW QUESTION 9
Scenario: During an assessment, a Citrix Architect is asked to review a Citrix policy setting that is NOT being applied as intended. The policy was intended to allow any user from the Managers group who is accessing Virtual Delivery Agent (VDA) machines within the “Win2012 Desktops” Delivery Group to access local client drives from within the HDX session.
However, testing verifies that users from the Managers group are NOT able to view their endpoint's drives from within their session. While verifying the policy settings, the architect notes several misconfigurations.
Click the Exhibit button to view information collected by the architect during the investigation.

Which action would permit the “Allow client fixed drives access” policy to apply to the Managers group?

• A. Add a security filter to the GPO containing Citrix policies in the Group Policy Management Console.
• B. Change the assignment of the policy in Citrix Studio.
• C. Change the priority of the policy in Citrix Studio.
• D. Change the link location for the Loopback processing GPO in the Group Policy Management Console.

Answer: C

NEW QUESTION 10
Scenario: A Citrix Architect is designing a XenDesktop environment. The Engineer group uses graphical applications which require the use of AMD hardware shared virtualized GPU. Which two hypervisors can the architect select? (Choose two.)

• A. XenServer 6.5
• B. VMware vSphere 5.5
• C. XenServer 7.0
• D. VMware vSphere 6.0
• E. Microsoft Hyper-V Server 2012 R2

Answer: AC

NEW QUESTION 11
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The customer is interested in using Machine Creation Services with App Layering in the environment.
Which consideration would result in the architect recommending that the customer use a different image and application management approach?

• A. The environment must use XenApp Enterprise concurrent licensing.
• B. PXE is required for non-Citrix machines in the networks which will support the Virtual Delivery Agent (VDA) machines.
• C. Microsoft Hyper-V hosts must be used to host the Virtual Delivery Agent (VDA) machines.
• D. The machines must use an existing SAN deployment.
• E. The images must be deployed to physical machines.

Answer: A

NEW QUESTION 12
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The customer previously installed all applications locally on managed laptops and desktops but is willing to evaluate other application delivery methods as part of the new deployment. The environment will be standardized on Windows 10 and Windows Server 2021 for the Virtual Delivery Agent (VDA) machines.
As part of an application analysis performed earlier in the project, the information in the Exhibit was collected regarding one of the required applications.
Click the Exhibit button to view the information.

The customer has an additional objective to minimize the number of images that must be managed. How should the architect install the application?

• A. Directly on endpoint devices and included in a virtual desktop session using the Local App Access feature
• B. On an Application Layer using Citrix App Layering, be included in a layered image, and accessed through a virtual desktop session
• C. Directly on a Server OS VDA machine and accessed from the endpoint as a published application
• D. Stream it to a VDA machine using Microsoft App-V and accessed through a virtual desktop session
• E. On an Application Layer using Citrix App Layering then be presented to assigned users as an Elastic Layer during a virtual desktop session

Answer: B

NEW QUESTION 13
Scenario: A Citrix Architect needs to assess a XenApp and XenDesktop environment. The XenApp and XenDesktop diagram in the Exhibit gives details about the current Site and Zone design.
Click the Exhibit button to view the diagram.



What should the architect recommend based on the current Site and Zone design?

• A. Add an additional Delivery Controller to the Primary Zone.
• B. Replace Satellite Zone 2 with a separate XenDesktop Site.
• C. Add additional StoreFront servers to Satellite Zone 2.
• D. Replicate the XenDesktop Site database to Satellite Zone 2.

Answer: A

NEW QUESTION 14
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.
Click the Exhibit button to view the requirements.

Which feature of Citrix Profile Management could help the architect address the Graphic Designers group requirements?

• A. Profile caching
• B. Profile streaming
• C. File exclusions
• D. Active Write Back

Answer: B

NEW QUESTION 15
Scenario: A Citrix Architect must complete a XenApp and XenDesktop security assessment. After examining the network topology for the hypervisor hosts supporting the Virtual Delivery Agent (VDA) machines, the architect finds that some of the network connections are NOT following leading security practices.
Click the Exhibit button to view a high-level diagram which shows the connectivity between various components.



Which three of the labeled areas of the diagram represent connections which are NOT following Citrix leading security practices? (Choose three.)

• A. G
• B. B
• C. A
• D. E
• E. F
• F. D
• G. C

Answer: DEF

NEW QUESTION 16
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.

The architect should scale the hardware used to host the VMs for User Group 1 to _____ GB of RAM. (Choose the correct option to complete the sentence.)

• A. 256
• B. 128
• C. 384
• D. 196
• E. 64

Answer: C

NEW QUESTION 17
Scenario: A Citrix Architect is reviewing a XenApp and XenDesktop design for an environment with multiple Active Directory forests.
Click the Exhibit button to view the design details.



Which risk should the architect highlight to the customer, based on the details listed in the Exhibit?

• A. The SupportMultipleForest registry key is NOT supported.
• B. The Active Directory trust method is NOT supported.
• C. The Active Directory functional level is NOT supported.
• D. The DNS lookup strategy is NOT supported.

Answer: C