All About High Quality 1Z0-597 Braindumps

NEW QUESTION 1
When setting up Oracle VM Server for SPARC on a SPARC 14 server, you did not remove unneeded PCIe devices from control (primary) domain. What is the impact?

• A. PCIe devices from the control domain can no longer be used in I/O domain.
• B. Removing PCIe devices from the control domain for use in I/O domains requires a delayed reconfiguration and a reboot of the control domain.
• C. You can no longer migrate guest domains to another physical system by means of the domain migration Feature.
• D. There is no impact, as PCIe devices can be dynamically reassigned from the control domain to an I/O domain.

Answer: A

NEW QUESTION 2
The SPARC T4-2 server has than the SPARC T4-1 server.

• A. 512 GB more memory
• B. 1 TB more memory
• C. 64 more compute threads
• D. 128 more compute threads

Answer: B

NEW QUESTION 3
System errorscan go undetected by the Oracle VTS test, since many are detected, managed, and reported by Oracle Solaris Predictive Self-Healing. What is one way to display these errors and faults?

• A. Review the VTS error file
• B. Review the output of fmdump
• C. Review the system log files
• D. Review the VTS kernel error log

Answer: D

NEW QUESTION 4
Power-on self-test (POST) detected a faulty core on a SPARC T4-2 server. The server supports an important internal application for the customer. What is the state of the application and why?

• A. The application is unavailable until the processor with the faulty core has been replaced.
• B. The application is available with limited computing resources since POST disabled the processor with the faulty core.
• C. The application is available since POST disabled the faulty core.
• D. The application is unavailable until the processor with the faulty core has been disabled by the system administrator.

Answer: C

NEW QUESTION 5
In planning for the installation of a SPARC T4 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. According to the Enterprise Installation Standards (EIS) methodology, what should you do?

• A. Always install the most recent version of a patch
• B. Delay Installation until the updated patch is published to the EIS-DVD
• C. Do not Install the patch, unless instructed to do so by an EIS-Alert
• D. Never Install patches outside of the EIS-DVD

Answer: A

NEW QUESTION 6
In order to consolidate the applications on a SPARC T4 server, you require virtual machines that run an independent operating system instance. Which virtualization technology did you select?

• A. Oracle Solaris containers
• B. Dynamic Domains
• C. Oracle VM Server for SPARC
• D. Oracle VirtualBox

Answer: C

Explanation:

Reference:http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/o11-090-sparc-t4-arch-496245.pdf(page 25, first para)

NEW QUESTION 7
During the acclimatization process, what is the maximum positive or negative temperature
gradient that is permitted for multi-layer boards?

• A. Approximately 2° C (4° F) per hour
• B. Approximately 4° C (7° F) per hour
• C. Approximately 6° C (11° F) per hour
• D. Approximately 8° C (4° F) per hour

Answer: A

NEW QUESTION 8
A faulty DIMM needs to be replaced on a SPARC T4-2 server. What are two ways to determine which DIMM on a memory riser is faulty?

• A. Run the Oracle ILOM show faulty command.
• B. Run Oracle VTS software.
• C. Run the Oracle ILOM –al command.
• D. Press the Remind button on the memory riser.

Answer: AD

NEW QUESTION 9
You are running Oracle Solaris on a SPARC T4 server and wish to enable network traffic control and guest domains. What action needs to be performed?

• A. Nothing, since networking between the control and guest domains are automatically enabled
• B. Add a virtual network device to each guest domain
• C. Configure the virtual switch device as a network device
• D. Set up an I/O domain that has direct access to a physical I/O device

Answer: B

NEW QUESTION 10
When replacing the motherboard, how do you preserve the server’s original host ID and MAC address?

• A. Move the System Configuration PROM from the old motherboard to the new motherboard.
• B. Back up the service processor configuration details from the old system, and restore on the new system.
• C. Move the service processor card from the old system to the new system.
• D. For security, it not possible to preserve the server’s host ID and MAC address.

Answer: A

NEW QUESTION 11
Identify two specification of the Enterprise Installation Standard (EIS) for Basic Solaris.

• A. It defines the process for downloading Solaris and related patches from the Oracle support web site
• B. It requires the Installer to use the appropriate his Installation checklists when Installing Solaris
• C. It mandates that Installers use the EIS-DVD during the Installation process
• D. It provide the guidelines and patch levels for Installing Solaris 8, 9, 10, or 11

Answer: B

NEW QUESTION 12
What is out-of-order execution?

• A. A feature of certain processors, where instructions are processed based on the availability of data.
• B. A feature multicore processors, where a core can be given processing priority over the other cores.
• C. A memory architecture feature, where specific data can be delivered to processors at the fastest possible rate.
• D. A feature of certain operating systems, where programs are executed based on the availability of data.

Answer: C

NEW QUESTION 13
You have set up several guest domains on a SPARC T4 server. Which operating system(s) are supported in these guest domains?

• A. Oracle Solaris only
• B. Oracle Linux only
• C. Oracle Solaris or Oracle Linux
• D. Oracle Solaris, Oracle Linux, and OpenSolaris

Answer: A

NEW QUESTION 14
You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue?

• A. You need to add SSH keys to the system before creating additional user accounts.
• B. You do not have the user management role enabled.
• C. You do not have the host control role enabled.
• D. You have exceeded the maximum number of 5 user accounts.

Answer: B

NEW QUESTION 15
You are installing a SPARC T4 server at a customer site using a single-phase power feed. The power outlet is 15 meters (16.4 feet) from device. Which Enterprise Installation Standard (EIS) document would you have highlighted this issue prior to installation?

• A. Site audit report
• B. Test procedure plan
• C. Power routing map
• D. Server operational checklist

Answer: D

NEW QUESTION 16
You need to hot-plug a hard drive, which is not a boot device, while the server is online. Whichaction is required before removing the drive?

• A. Verify that the green OK-to-OK LED is lit on the hard drive.
• B. Take the drive offline before removing.
• C. Temporarily shut down the OS.
• D. Run the cfgadm –c configure command.

Answer: B

NEW QUESTION 17
You have the Oracle ILOM keyswitch_state=standby. What is the Impact ?

• A. The system will power on and run power-on self-test (POST), but Oracle Solaris will not boot.
• B. The system will power on and run power-on self-test (POST), but no flash updates can be made.
• C. The system cannot power on.
• D. The system powers on, but does not run power-on self-test (POST) or boot Oracle Solaris.

Answer: D

NEW QUESTION 18
What is main objective of having Enterprise Installation Standards (EIS)?

• A. To create a framework for tracking improperly installed systems
• B. To produce consistent, high quality installations
• C. To produce systems optimized for Oracle software deployments
• D. To create a framework for tracking properly installed systems

Answer: B

NEW QUESTION 19
According to Enterprise Installation Standards (EIS), which is recommended when creating virtual disk devices for use in guest domain?

• A. Create a new volume from an existing ZFS pool
• B. Use file containers
• C. Use the file containers and ZFS clones to multiply images
• D. Use a disk slice directly

Answer: C

NEW QUESTION 20
The customer wants power-on self-test (POST) to be triggered any time power is applied, or there is an error-invoked reset. How is this best accomplished?

• A. Set the diagnostic trigger value to "power-on-reset" and level of diagnostic s to "debug"
• B. Set the diagnostic trigger value to "error-reset" and level of diagnostics to "debug".
• C. Set the diagnostic trigger value to "all resets".
• D. Set the diagnostic trigger value to "power-on-reset error-reset".

Answer: D

NEW QUESTION 21
During the initial installation of a SPARC T4-2 server, you notice the SP NET MGT port is not available. What is one possibility?

• A. The SPARC T4-2 does not use the SP NET MGT port.
• B. It must be connected to a Gigabit network.
• C. The network does not use DHCP.
• D. The Oracle ILOM is down.

Answer: C

NEW QUESTION 22
On a SPARC T4 server running Oracle Solaris 10, you execute the following command:
# lucreate –c sol_run –m /:/dev/dsk/c0t4d0s0:ufs \ -m /usr:/dev/dsk/c0t4d0s3:ufs –n sol_tan What is the result?

• A. Create a new boot environment named “sol_tan” and name the active boot environment “sol_run”.
• B. Create a new boot environment named “sol_named” and name the active boot environment “sol_tan”.
• C. Replaces the existing boot environment “sol_run” with “sol_tan”
• D. Replaces the existing boot environment “sol_tan” with “sol_run”

Answer: A

NEW QUESTION 23
You have configured DNS and have determined that the services processor serial number for your target server is 0641AMA007. What is the host name of this server?

• A. SUN-0641AMA007
• B. SUNCMM0-0641AMA007
• C. SUNCMM1-0641AMA007
• D. SUNSP-0641AMA007

Answer: A

NEW QUESTION 24
According to the Enterprise Installation Standards (EIS) on electrical grounding, what is the benefit of additional grounding points?

• A. Protect systems by helping to avoid leakage current
• B. Allows racks to support either AC or DC
• C. Allows a rack to support more than two dedicated circuit feeds for higher redundancy
• D. Allows a rack to support more than one UPS system for higher redundancy

Answer: A

NEW QUESTION 25
You lost your Oracle ILOM settings after a service processor firmware update. Why?

• A. You did not enable the Preserve Configuration option.
• B. You did not back up the Oracle ILOM configuration.
• C. Oracle ILOM settings must be re-established after every firmware update.
• D. You used the Oracle ILOM web interface rather than the CLI to perform the update.

Answer: A

NEW QUESTION 26
......