We provide real 70 410 exam questions and answers pdf exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Microsoft mcp 70 410 Exam quickly & easily. The mcsa 70 410 pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Microsoft 70 410 installing and configuring windows server 2012 dumps pdf and vce product and material, you can easily pass the microsoft 70 410 exam exam.

P.S. Accurate 70-410 training materials are available on Google Drive, GET MORE: https://drive.google.com/open?id=1XEw2m0USoR1DzdkDOR873WF9RHZitH-o


New Microsoft 70-410 Exam Dumps Collection (Question 4 - Question 13)

Q4. Your company has an Active Directory domain. You log on to the domain controller. The Active Directory Schema snap-in is not available in the Microsoft Management Console (MMC).

You need to access the Active Directory Schema snap-in. What should you do?

A. Register Schmmgmt.dll.

B. Log off and log on again by using an account that is a member of the Schema Admins group.

C. Use the Ntdsutil.exe command to connect to the schema master operations master and open the schema for writing.

D. Add the Active Directory Lightweight Directory Services (AD/LDS) role to the domain controller by using Server Manager.

Answer: A

Explanation:

Install the Active Directory Schema Snap-In

You can use this procedure to first register the dynamic-link library (DLL) that is required for the Active Directory Schema snap-in. You can then add the snap-in to Microsoft

Management Console (MMC).

To install the Active Directory Schema snap-in:

1. To open an elevated command prompt, click Start, type command prompt and then right- click Command Prompt when it appears in the Start menu. Next, click Run as administrator and then click OK.

To open an elevated command prompt in Windows Server 2012 R2, click Start, type cmd, right-click cmd and then click Run as administrator.

2. Type the following command, and then press ENTER: regsvr32 schmmgmt.dll

3. Click Start, click Run, type mmc and then click OK.

4. On the File menu, click Add/Remove Snap-in.

5. Under Available snap-ins, click Active Directory Schema, click Add and then click OK.

6. To save this console, on the File menu, click Save.

7. In the Save As dialog box, do one of the following:

* To place the snap-in in the Administrative Tools folder, in File name, type a name for the snap-in, and then click Save.

* To save the snap-in to a location other than the Administrative Tools folder, in Save in , navigate to a location for the snap-in. In File name, type a name for the snap-in, and then click Save.


Q5. Your network contains multiple subnets.

On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.

You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.

You need to ensure that client computers can resolve IP addresses to host names. What should you do first?

A. Create a GlobalNames zone.

B. Convert the contoso.com zone to an Active Directory-integrated zone.

C. Configure dynamic updates for contoso.com.

D. Create a reverse lookup zone.

Answer: D

Explanation:

Use a reverse lookup zone to be able to resolve IP addresses to host names.


Q6. You perform a Server Core Installation of window Server 2012 R2 on server named Server1.

You need to add a graphical user interface (GUI) to server1. Which tool should you use?

A. the Add-WindowsFeature cmdlet

B. the Install-Module cmdlet

C. the setup.exe command

D. the Add-WindowsPackage cmdlet

Answer: A


Q7. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.

You have a virtual machine named VM1. VM1 has a checkpoint. You need to modify the Checkpoint File Location of VM1.

What should you do first?

A. Copy the checkpoint file.

B. Delete the checkpoint.

C. Shut down VM1.

D. Pause VM1.

Answer: B


Q8. Server1 runs Windows Server 2012 R2 and is installed as an FTP server. Client uses App1 to connect to Server1 for FTP. App1 uses TCP port 21 for control and a dynamic port for data. You have allowed port 21 in firewall. What should you do next in order to allow clients to use App1 to connect to server1 using ftp.

A. At Server1 allow firewall rule of outbound

B. At Server1 allow firewall rule of inbound

C. Netsh advfirewall domainprofile state off

D. Netsh advfirewall set global StatefulFtp enable

Answer: D

Explanation:

Set global statefulftp

Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. This affects

both active and passive FTP.


Q9. Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1that runs Windows Server 2012 R2.

You create a DHCP scope named Scope1. The scope has a start address of 192168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.

You need to ensure that Scope1 has a subnet mask of 255.255.255.0. What should you do first?

A. From Windows PowerShell, run the Remove-DhcpServerv4PolicyIPRange cmdlet.

B. From the DHCP console, modify the Scope Options of Scope1.

C. From Windows PowerShell, run the Remove-DhcpServerv4Scope cmdlet.

D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.

Answer: C

Explanation:

u2711 Set-DhcpServerv4Scope

Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

u2711 Syntax:

Parameter Set: WithoutRange

Set-DhcpServerv4Scope [-ScopeId] <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [- CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description

<String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [- SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [

<CommonParameters>] Parameter Set: WithRange

Set-DhcpServerv4Scope [-ScopeId] <IPAddress> -EndRange <IPAddress> -StartRange

<IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [- ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration

<TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [- NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [- ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]


Q10. You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements:

u2711 Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years.

u2711 Storage for an application named Application2 must be provided. Application2

requires 20 GB and will require a maximum of 900 GB in three years.

u2711 The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications.

u2711 The storage must be available if a single disk fails.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From File and Storage Services, create virtual disks by using fixed provisioning.

B. From File and Storage Services, create a storage pool that uses all four disks.

C. From Disk Management, create two new mirror volumes that use two disks each.

D. From Disk Management, create a new RAID-5 volume that uses all four disks.

E. From File and Storage Services, create virtual disks by using thin provisioning.

Answer: B,E


Q11. You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06.

Which of the following actions should you take?

A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.

B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.

C. You should consider accessing the TS Manager console on ENSUREPASS-SR07

D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.

Answer: B


Q12. Your network contains an Active Directory domain named contoso.com.

You have a Group Policy object (GPO) named GPO1 that contains several user settings. GPO1 is linked to an organizational unit (OU) named OU1.

The help desk reports that GPO1 applies to only some of the users in OU1.

You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)

You need to configure GPO1 to apply to all of the users in OU1. What should you do?

A. Modify the Security settings of GPO1.

B. Disable Block Inheritance on OU1.

C. Modify the GPO status of GPO1.

D. Enforce GPO1.

Answer: A

Explanation:

Inheritance is blocked, but that would only affect policies applied ABOVE the given OU, not the one applied directly to it (as is the case with GPO1). Also Enforcing a policy is only going to cause it to be applied even when inheritance is blocked (which, as mentioned, does not make a difference on policies which are directly linked to the OU as a child). That means that there must be something in the security settings (such as a Security Group which does not have the u201creadu201d or u201cApply group policyu201d permission) preventing ALL of the users in OU1 from having the policy applied. (GPO status is the status of its replication within the forest, so it is not relevant here.)


Q13. Your network contains two subnets. The subnets are configured as shown in the following table.

You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.

You need to ensure that Server2 can communicate with the client computers on LAN2. What should you do?

A. Change the metric of the 10.10.1.0 route.

B. Set the state of the Teredo interface to disable.

C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.

D. Run route delete 172.23.2.0.

Answer: D

Explanation:

You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent.


100% Updated Microsoft 70-410 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/70-410-dumps/ (New 496 Q&As)