Our pass rate is high to 98.9% and the similarity percentage between our 70 410 practice exam study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft exam 70 410 pdf exam in just one try? I am currently studying for the Microsoft 70 410 exam questions exam. Latest Microsoft 70 410 exam questions and answers pdf Test exam practice questions and answers, Try Microsoft mcsa 70 410 pdf Brain Dumps First.
P.S. Practical 70-410 Q&A are available on Google Drive, GET MORE: https://drive.google.com/open?id=12Hnv9NReMM9UllL56hyQjMBaXTShJEqc
New Microsoft 70-410 Exam Dumps Collection (Question 11 - Question 20)
Question No: 11
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
You create a LUN on the SAN to host the virtual hard drive files for the virtual machines. You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent
VM1 from being paused if the LUN runs out of disk space. Which type of virtual hard disk should you create on the LUN?
A. Dynamically expanding VHDX
B. Fixed-size VHDX
C. Fixed-size VHD
D. Dynamically expanding VHD
Answer: B
Explanation:
The virtual disk needs to be a VHDX file since it is going to be over 2TB in size and it must be fixed-size so that the space is already taken on the server (that way the server does not
run out of space as the volume grows) even if the actual virtual disk does not yet hold that amount of data.
Question No: 12
You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail. The solution must minimize the number of disks used to create the volume. Which three actions should you perform in sequence?
A. Add five physical disks
B. Create a storage space and set the disk allocation of one of the disks to "Hot Spare"
C. Create a virtual disk
D. Create a storage space by using the default disk allocation
E. Add three physical disks
Answer: A,C,D
Explanation:
A storage space with three-way mirroring can tolerate two disk failures but requires a minimum of five disks.
References:
http://technet.microsoft.com/en-us/library/hh831739.aspx http://technet.microsoft.com/en-us/library/jj822938.aspx http://technet.microsoft.com/en-us/library/jj899886.aspx http://technet.microsoft.com/en-us/library/5de72fb5-e1e3-43a7-a176-d17cdf4d312e
Question No: 13
Your network contains an Active Directory forest that contains three domains.
A group named Group1 is configured as a domain local distribution group in the forest root domain.
You plan to grant Group1 read-only access to a shared folder named Share1.Share1 is located in a child domain.
You need to ensure that the members of Group1 can access Share1. What should you do first?
A. Convert Group1 to a universal security group.
B. Convert Group1 to a global distribution group.
C. Convert Group1 to a universal distribution group.
D. Convert Group1 to a domain local security group.
Answer: A
Explanation:
Universal can be used for any domain or forest. Furthermore a Universal group can span multiple domains, even the entire forest.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and Administer Active Directory, Objective 5.3 Create and manage Active Directory groups and Organization units, p. 289-291, 293
http://technet.microsoft.com/en-us/library/cc781446(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx
Question No: 14
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. A server named Server1 is configured to encrypt all traffic by using IPSec.
You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec.
What should you do?
A. From a command prompt, run netsh set global autotuninglevel = highly restricted congestion provider = none.
B. From a command prompt, run netsh set global autotuninglevel = restricted congestionprovider = ctcp.
C. From Windows Firewall with Advanced Security, allow unicast responses for the Domain Profile.
D. From Windows Firewall with Advanced Security, exempt ICMP from IPSec.
Answer: D
Question No: 15
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first?
A. From Windows PowerShell on Server2, run Enable-PSRemoting cmdlet.
B. From Windows PowerShell on Server1, run Install-Windows Feature.
C. From Windows Firewall with Advanced Security on Server2, create an inbound rule.
D. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.
Answer: B
Explanation:
When the DHCP role is installed, it appears that the firewall rules are automatically added, so C is not valid (not only that, but either way it is an existing rule that one would need only enable nonetheless, not create a new rule). This means you only need to add the DHCP Manager MMC snap-in which is a Role Administration Tool feature.
So the correct answer must be B.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6 Network
Administration, p.228
Question No: 16
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named L0N-DC1. L0N-DC1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100 to 172.16.1.200. The solution must minimize administrative effort.
What should you create?
A. Server level policies
B. Reservations
C. Filters
D. Scope level policies
Answer: D
Explanation:
The scope is already in place.
Scope level policies are typically settings that only apply to that scope. They can also overwrite a setting that was set at the server level.
When a client matches the conditions of a policy, the DHCP server responds to the clients based on the settings of a policy.
Settings associated to a policy can be an IP address range and/or options.
An administrator could configure the policy to provide an IP address from a specified sub- range within the overall IP address range of the scope.
You can also provide different option values for clients satisfying this policy. Policies can be defined server wide or for a specific scope.
A server wide policy u2013 on the same lines as server wide option values u2013 is applicable to all scopes on the DHCP server.
A server wide policy however cannot have an IP address range associated with it. There a couple of ways to segregate clients based on the type of device. One way to do this is by using vendor class/identifier.
This string sent in option 60 by most DHCP clients identify the vendor and thereby the type of the device.
Another way to segregate clients based on device type is by using the MAC address prefix. The first three bytes of a MAC address is called OUI and identify the vendor or manufacturer of the device.
By creating DHCP policies with conditions based on Vendor Class or MAC address prefix, you can now segregate the clients in your subnet in such a way, that devices of a specific type get an IP address only from a specified IP address range within the scope. You can also give different set of options to these clients.
In conclusion, DHCP policies in Windows Server 2012 R2 enables grouping of clients/devices using the different criteria and delivering targeted network configuration to them.
Policy based assignment in Windows Server 2012 R2 DHCP allows you to create simple yet powerful rules to administer DHCP on your network.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, p.253
Question No: 17
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1. You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file.
The solution must minimize the amount of downtime on VM1. What should you do?
A. From a command prompt, run dism.exe and specify the /delete-image parameter.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From Hyper-V Manager, delete the checkpoint.
D. From Hyper-V Manager, inspect the virtual hard disk.
Answer: C
Question No: 18
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.
Server1 is configured to obtain an IPv4 address by using DHCP.
You need to configure the IPv4 settings of the network connection on Server1 as follows:
u2711 IP address: 10.1.1.1
u2711 Subnet mask: 255.255.240.0
u2711 Default gateway: 10.1.1.254
What should you run?
A. netsh.exe
B. netcfg.exe
C. msconfig.exe
D. ipconfig.exe
Answer: A
Explanation:
In order to configure TCP/IP settings such as the IP address, Subnet Mask, Default Gateway, DNS and WINS addresses and many other options you can use Netsh.exe. Incorrect:
Not D: Windows Server 2012 Core still has IPCONFIG.EXE that can be used to view the IP configuration.
Modern servers typically come with several network interface ports. This causes IPCONFIG.EXE to scroll off the screen when viewing its output. Consider piping the output if IPCONFIG.EXE to a file and view it with Notepad.exe.
Question No: 19
Your network contains an Active Directory domain named contoso.com.
All of the AppLocker policy settings for the member servers are configured in a Group Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer policy.
You need to merge the local AppLocker policy settings from Server1 into the AppLocker policy settings of GPO1.
What should you do?
A. From Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by using Group Policy Management Editor.
B. From Server1, run the Set-ApplockerPolicy cmdlet.
C. From Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by using Group Policy Management Editor.
D. From Server1, run the New-ApplockerPolicy cmdlet.
Answer: : B
Explanation:
The Set-AppLockerPolicy cmdlet sets the specified Group Policy Object (GPO) to contain the specified AppLocker policy. If no Lightweight Directory Access Protocol (LDAP) is specified, the local GPO is the default.
When the Merge parameter is used, rules in the specified AppLocker policy will be merged with the AppLocker rules in the target GPO specified in the LDAP path. The merging of policies will remove rules with duplicate rule IDs, and the enforcement setting specified by the AppLocker policy in the target GPO will be preserved. If the Merge parameter is not specified, then the new policy will overwrite the existing policy.
References:
http://technet.microsoft.com/en-us/library/ee791816(v=ws.10).aspx
Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, Lesson1: Planning, Implementing and managing Group Policy, p. 479
Question No: 20
Your network contains an Active Directory domain named contoso.com. The domain contains 100 servers. The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must
ensure that Group1 is added only to the servers. What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation:
:A. This would add the group to the wrong OU
:B. This would affect the whole domain and would effect member of the group
:C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
:D. Restricted Groups defines what member or groups should exist as part of a group Why use Group Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy, Group Policy preferences only App1y to Active Directory policy. You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer
VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services
Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management
Start Menu properties and menu items
P.S. Easily pass 70-410 Exam with Certifytools Practical Dumps & pdf vce, Try Free: https://www.certifytools.com/70-410-exam.html (496 New Questions)