Real HPE0-S56 Training Tools 2021

NEW QUESTION 1
You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do you need to use?

• A. OneView Standard
• B. Smart Storage Administrator
• C. Central Management Console
• D. Library & Tape Tools

Answer: D

NEW QUESTION 2
A customer needs to increase the availability and bandwidth of network connectivity to their servers. Which switch feature meets the customer’s needs?

• A. Remote direct memory access over Converged Ethernet (RoCE)
• B. Virtual Local Area Network (VLAN)
• C. Jumbo frames
• D. Link Aggregation and Control Protocol (LACP)

Answer: D

NEW QUESTION 3
A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

• A. It will enable two-factor authentication when users log on to iLO.
• B. It will enhance iLO security by leveraging the key stored in the silicon root of trust.
• C. It will allow the servers’ iLO to detect compromised firmware code.
• D. It will enable Zero Sign In to log in to iLO without entering a user name and password.

Answer: D

NEW QUESTION 4
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?

• A. ProLiant ML
• B. ProLiant DL
• C. ProLiant BL
• D. ProLiant MicroServer

Answer: A

NEW QUESTION 5
You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.
How should you connect the switch to the network?

• A. Configure multiple user IDs or roles for the console connection
• B. Configure the management IP address on the switch and enable Telnet or SSH access
• C. Use a dedicated console cable to create a dedicated management network for every user
• D. Connect the switch to the network by using the serial cable that ships with the switch

Answer: B

NEW QUESTION 6
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).
Which additional option is required?

• A. 500W Flex Slot Platinum PS Kit
• B. M.2 Solid State Enablement Kit
• C. Gen10 Bezel Kit
• D. High Performance Fan Kit

Answer: D

NEW QUESTION 7
You need to configure a HPE ProLiant server and plan to install an operating system that supports Secure Boot.
Which system utility should you use to configure the server?

• A. Intelligent Provisioning
• B. Smart Storage Administrator
• C. iLO
• D. UEFI

Answer: D

NEW QUESTION 8
Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

• A. HPE System Insight Manager
• B. HPE Intelligent Management Center (IMC)
• C. HPE OneView
• D. HPE Intelligent Provisioning

Answer: D

NEW QUESTION 9
A customer requires an entry-level, all-flash storage system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system meets the customer’s requirements?

• A. 3PAR 8450
• B. MSA 2052
• C. StoreVirtual 4335
• D. Nimble AF 1000

Answer: A

NEW QUESTION 10
A customer needs to share files cost-effectively among their Microsoft Windows server over a local network. Which storage solution meets this requirement?

• A. Storage Area Network (SAN)
• B. Network File System (NFS)
• C. Direct Attached Storage (DAS)
• D. Network Attached Storage (NAS)

Answer: D

NEW QUESTION 11
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Server model – HPE Proliant DL380 Gen10 Storage model – HPE MSA 2040

NEW QUESTION 12
You are installing a server solution in a customer’s data center.
How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

• A. Use a single-phase, two-wire power receptacle with protective earth or ground (PE) to filter interference from the power grid
• B. Do not allow the overall system AC current load to exceed 80% of the branch circuit AC current rating
• C. Use fanout cables when connecting the server to the network for maximum electrical impedance
• D. Balance the server power load between available AC supply branch circuits
• E. Configure the server power to a single electrical circuit in the data center

Answer: BD

NEW QUESTION 13
Match the Networking Product Family to the appropriate use case:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14
A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

• A. Isolate the management network from production traffic
• B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data
• C. Configure IRF on the switches
• D. Configure in-band management to manage the switches through gigabit Ethernet ports

Answer: A

NEW QUESTION 15
Which security feature is unique to HPE ProLiant Gen10 servers?

• A. Advanced auditing capability in the processor detects suspicious behavior in the kernel?
• B. Persistent memory protects virtual machines from compromises in the network fabric
• C. Increased application isolation controls network traffic to virtual machines
• D. With the silicon root of trust, Gen10 servers can detect compromised firmware

Answer: D

NEW QUESTION 16
A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.
Which component addresses these issues?

• A. Converged network adapter
• B. Dual-port 10 GbE FlexLOM
• C. Dynamic Smart Array controller
• D. Fibre Channel host bus adapter

Answer: A

NEW QUESTION 17
A customer needs to implement VMware across a few racks of servers. They anticipate a large amount of VM creation and retirement.
What are key technologies in a Top of Rack (ToR) switch that support this environment? (Choose three.)

• A. Smart Rate Support
• B. Deep Packet Buffers
• C. VPN Support
• D. PoE support
• E. MLAG support
• F. Rapid Configuration Management

Answer: ABE

NEW QUESTION 18
You are installing a rack at customer site.
How can you ensure redundant power to the rack?

• A. Install two power distribution units (PDUs) with each one connected to a power socket supplied by an independent electrical power source.
• B. Ensure 3-phase power is available in the data center.
• C. Connect an uninterruptible power supply (UPS) to redundant circuit breakers at the facility power source.
• D. Use two different power cords to connect the server to the power grid at the customer site.

Answer: C

NEW QUESTION 19
Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?

• A. Central Management Console
• B. Integrated Management Log
• C. Intelligent Provisioning
• D. Smart Storage Administrator

Answer: D

NEW QUESTION 20
A company needs a solution that provides SMB and NFS file shares. The solution must have a built-in data backup to Microsoft Azure.
Which HPE solution meets the customer’s needs?

• A. StoreOnce 3520
• B. StoreEasy 1000
• C. StoreOnce VSA
• D. StoreVirtual VSA

Answer: B

NEW QUESTION 21
A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources. Which action should the customer take first?

• A. Access InfoSight for recommendations
• B. Access the SSMC for upgrade advice
• C. Access the clustering feature in the CMC to configure active/active clustering
• D. Access Smart Storage Administrator to configure additional storage resources

Answer: A

NEW QUESTION 22
Match the industry trend with its use case.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Efficiently user server, storage, and networking resources – Virtualization
Externalize the infrastructure and eliminate data center capital expenditures – Cloud computing
Share a common resource or execute a common application across multiple servers for high availability and/or load balancing – Clustering
Deploy workloads at cloud-like speed on an HPE factory-integrated infrastructure – Converged system

NEW QUESTION 23
......