The Down To Date Guide To 350-501 Free Exam

NEW QUESTION 1
What is the role of NFVI?

• A. domain name service
• B. intrusion detection
• C. monitor
• D. network address translation

Answer: C

NEW QUESTION 2
Refer to the exhibit.

A global company plans to implement BGP at its newest location to provide connectivity to other offices. The global infrastructure of the company is a multivendor environment. An engineer must review the BGP core configurations at headquarters to determine if they can be repurposed at the new location. The engineer copied this JSON script for review. What is the effect of the script?

• A. It configures BGP with neighbor 192.168.1.2 residing in AS 65514.
• B. It sets the BGP router-ID to 192.168.1.2 and sets the AS of the router to 65514.
• C. It configures BGP on the device and inserts 192.168.1.0/24 into the BGP table using the origin AS 65514.
• D. It configures a VRF named cisconode1 and a BGP instance using the VPNv4 address family.

Answer: A

NEW QUESTION 3
Refer to the exhibit:

In which way does router R1 operate differently than router R2?

• A. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
• B. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
• C. R1 sends LSA type 2 only and R2 sends LSA type 1 only
• D. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs

Answer: B

NEW QUESTION 4
An engineer is moving all of an organization’s Cisco IOS XE BGP routers to the address-family identifier format. Which command should be used to perform this upgrade quickly with the minimum service disruption?

• A. vrf upgrade-cli
• B. bgp upgrade-cli
• C. address-family ipv4
• D. ip bgp-community new-format

Answer: B

NEW QUESTION 5
Refer to the exhibit.

An engineer is configuring multitopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to the router to complete the task?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 6
Refer to the exhibit.

An administrator working for large ISP must connect its two POP sites to provide internet connectivity to its customers. Which configuration must the administrator perform to establish an iBGP session between routers PE1 on POP site 1 and PE2 on POP site 2?

• A. PE2#configure terminal PE2(config)#router bgp 65111PE2(config-router)#no neighbor 172.18.10.1 shutdown PE2(config-router)#end
• B. PE1#configure terminal PE1(config)#router bgp 65111PE1(config-router)#no neighbor 172.19.10.10 shutdownPE1(config-router)#end
• C. PE1#configure terminal PE1(config)#router bgp 65111PE1(config-router)#address-family ipv4 unicast PE1(config-router-af)#neighbor 172.19.10.10 activate PE1(config-router-af)#end
• D. PE2#configure terminal PE2(config)#router bgp 65111PE2(config-router)#address-family ipv4 unicast PE2(config-router-af)#neighbor 172.18.10.1 activate PE2(config-router-af)#end

Answer: B

NEW QUESTION 7
Refer to the exhibit:

Which three outcomes occur if the prefix list is added to the neighbor? (Choose three)

• A. 192.168 0.0/19 is denie
• B. 192.168 0.0/17 is denied.
• C. 192.168 0.0/17 is permitted
• D. 192.168.0.0/16 is denied
• E. 192.168 0.0/16 is permitted
• F. 192.168 0.0/19 is permitted

Answer: CDF

NEW QUESTION 8
A network engineer must collect traffic statistics for an internal LAN toward the internet The sample must include the source and destination IP addresses, the destination ports, the total number of bytes from each flow using a 64-bit counter, and all transport flag information. Because of CPU limits, the flow collector processes samples that are a maximum of 20 seconds long. Which two configurations must the network engineer apply to the router? (Choose two.)

• A. Option A
• B. Option B
• C. Option C
• D. Option D
• E. Option E

Answer: BE

NEW QUESTION 9
What is a constraint of Cisco MPLS TE tunnel configurations?

• A. Tunnels cannot span multiple OSPF areas.
• B. With ISIS as an IG
• C. only older-style metrics are used.
• D. Tunnels cannot be configured over IP unnumbered links.
• E. QoS-aware tunneling is not supported.

Answer: C

Explanation:

NEW QUESTION 10
Drag and drop the characteristics from the left onto the automation tool on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
Refer to the exhibit:

An engineer is preparing to implement data plane security configuration. Which statement about this configuration is true?

• A. Router 1 drops all traffic with a local-preference set to 150
• B. All traffic is dropped
• C. All traffic to 192.168.1.0/24 is dropped
• D. Router 1 and Router 2 advertise the route to 192.0.2.0/24 to all BGFD peers.

Answer: C

NEW QUESTION 12
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements:
• Management protocols must be marked with DSCP AF class 2 w4h low drop probability.
• Monitoring protocols must be marked with DSCP AF class 1 with low drop probability.
• All remaining traffic must be marked with a DSCP value of 0.
Which configuration must the engineer implement to satisfy the requirements?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configuration/guide/nexus10

NEW QUESTION 13
What are two features of 6RD IPv6 transition mechanism? (Choose two.)

• A. It inserts IPv4 bits into an IPv6 delegated prefix.
• B. It uses a native IPv6-routed network between CE routers and the BR router.
• C. It allows dynamic 1:N translation of IPv6 address.
• D. It uses stateful automatic 6to4 tunnels between CE routers and the BR router.
• E. It uses stateless automatic 6to4 tunnels between CE routers and the BR router.

Answer: AE

NEW QUESTION 14
What is the primary role of a BR router in a 6rd environment?

• A. It provides connectivity between end devices and the IPv4 network.
• B. It embeds the IPv4 address in the 2002::/16 prefix.
• C. It connects the CE routers with the IPv6 network.
• D. It provides IPv4-in-IPv6 encapsulation

Answer: C

NEW QUESTION 15
How does Cisco MPLS TE use OSPF extensions to allow for optimized transit between a headend router and a destination router?

• A. Router LSAs share router link advertisements to each router within the MPLS environment so that tunnels can be built bidirectionally.
• B. ASBR Summary LSAs share OSPF domain information so that the two routers know how to reach each other during tunnel setup.
• C. Network LSAs share RSVP information to build the tunnel between the two routers.
• D. Opaque LSAs calculate and establish unidirectional tunnels that are set according to the network constraint.

Answer: D

Explanation:
Cisco MPLS TE uses OSPF extensions to allow for optimized transit between a headend router and a destination router by utilizing Opaque LSAs. Opaque LSAs allow for the calculation and establishment of unidirectional tunnels that are set according to the network constraint. The tunnels are built bidirectionally by utilizing Router LSAs, which share router link advertisements to each router within the MPLS environment. ASBR Summary LSAs are also used to share OSPF domain information so that the two routers know how to reach each other during tunnel setup. Furthermore, Network LSAs are used to share RSVP information which is necessary for setting up the tunnel between the two routers.

NEW QUESTION 16
What Is one of the differences between Ansible and Chef?

• A. Ansible uses YAML and Chef uses Ruby.
• B. Chef requires the use of Windows in the environment and Ansible requires Linux.
• C. Chef is highly scalable and Ansible is highly secure.
• D. Ansible uses Ruby and Chef uses Python.

Answer: A

NEW QUESTION 17
......