Cause all that matters here is passing the Cisco 300-715 exam. Cause all that you need is a high score of 300-715 Implementing and Configuring Cisco Identity Services Engine (SISE) exam. The only one thing you need to do is downloading Certleader 300-715 exam study guides now. We will not let you down with our money-back guarantee.

Check 300-715 free dumps before getting the full version:

NEW QUESTION 1
An administrator for a small network is configuring Cisco ISE to provide dynamic network access to users. Management needs Cisco ISE to not automatically trigger a CoA whenever a profile change is detected. Instead, the administrator needs to verify the new profile and manually trigger a CoA. What must be configuring in the profiler to accomplish this goal?

  • A. Port Bounce
  • B. No CoA
  • C. Session Query
  • D. Reauth

Answer: B

Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-policies

NEW QUESTION 2
A Cisco device has a port configured in multi-authentication mode and is accepting connections only from hosts assigned the SGT of SGT_0422048549 The VLAN trunk link supports a maximum of 8 VLANS What is the reason for these restrictions?

  • A. The device is performing inline tagging without acting as a SXP speaker
  • B. The device is performing mime tagging while acting as a SXP speaker
  • C. The IP subnet addresses are dynamically mapped to an SGT.
  • D. The IP subnet addresses are statically mapped to an SGT

Answer: C

NEW QUESTION 3
A user changes the status of a device to stolen in the My Devices Portal of Cisco ISE. The device was originally onboarded in the BYOD wireless Portal without a certificate. The device is found later, but the user cannot re-onboard the device because Cisco ISE assigned the device to the Blocklist endpoint identity group. What must the user do in the My Devices Portal to resolve this issue?

  • A. Manually remove the device from the Blocklist endpoint identity group.
  • B. Change the device state from Stolen to Not Registered.
  • C. Change the BYOD registration attribute of the device to None.
  • D. Delete the device, and then re-add the device.

Answer: B

NEW QUESTION 4
Which protocol must be allowed for a BYOD device to access the BYOD portal?

  • A. HTTP
  • B. SMTP
  • C. HTTPS
  • D. SSH

Answer: C

NEW QUESTION 5
What must match between Cisco ISE and the network access device to successfully authenticate endpoints?

  • A. SNMP version
  • B. shared secret
  • C. certificate
  • D. profile

Answer: B

Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_network_devices.html

NEW QUESTION 6
What sends the redirect ACL that is configured in the authorization profile back to the Cisco WLC?

  • A. Cisco-av-pair
  • B. Class attribute
  • C. Event
  • D. State attribute

Answer: A

NEW QUESTION 7
What is an advantage of using EAP-TLS over EAP-MS-CHAPv2 for client authentication?

  • A. EAP-TLS uses a username and password for authentication to enhance security, while EAP-MS-CHAPv2 does not.
  • B. EAP-TLS secures the exchange of credentials, while EAP-MS-CHAPv2 does not.
  • C. EAP-TLS uses a device certificate for authentication to enhance security, while EAP-MS-CHAPv2 does not.
  • D. EAP-TLS uses multiple forms of authentication, while EAP-MS-CHAPv2 only uses one.

Answer: C

NEW QUESTION 8
An organization wants to enable web-based guest access for both employees and visitors The goal is to use a single portal for both user types Which two authentication methods should be used to meet this requirement? (Choose two )

  • A. LDAP
  • B. 802 1X
  • C. Certificate-based
  • D. LOCAL
  • E. MAC based

Answer: DE

NEW QUESTION 9
An administrator is troubleshooting an endpoint that is supposed to bypass 802 1X and use MAB. The endpoint is bypassing 802.1X and successfully getting network access using MAB. however the endpoint cannot communicate because it cannot obtain an IP address. What is the problem?

  • A. The DHCP probe for Cisco ISE is not working as expected.
  • B. The 802.1 X timeout period is too long.
  • C. The endpoint is using the wrong protocol to authenticate with Cisco ISE.
  • D. An AC I on the port is blocking HTTP traffic

Answer: B

NEW QUESTION 10
An administrator adds a new network device to the Cisco ISE configuration to authenticate endpoints to the network. The RADIUS test fails after the administrator configures all of the settings in Cisco ISE and adds the proper configurations to the switch. What is the issue"?

  • A. The endpoint profile is showing as "unknown."
  • B. The endpoint does not have the appropriate credentials for network access.
  • C. The shared secret is incorrect on the switch or on Cisco ISE.
  • D. The certificate on the switch is self-signed not a CA-provided certificate.

Answer: B

NEW QUESTION 11
What is a function of client provisioning?

  • A. It ensures an application process is running on the endpoint.
  • B. It checks a dictionary' attribute with a value.
  • C. It ensures that endpoints receive the appropriate posture agents
  • D. It checks the existence date and versions of the file on a client.

Answer: C

NEW QUESTION 12
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)

  • A. DHCP SPAN probe
  • B. SNMP query probe
  • C. NetFlow probe
  • D. RADIUS probe
  • E. DNS probe

Answer: BD

Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design

NEW QUESTION 13
Which Cisco ISE solution ensures endpoints have the latest version of antivirus updates installed before being allowed access to the corporate network?

  • A. Threat Services
  • B. Profiling Services
  • C. Provisioning Services
  • D. Posture Services

Answer: D

NEW QUESTION 14
An engineer is enabling a newly configured wireless SSID for tablets and needs visibility into which other types of devices are connecting to it. What must be done on the Cisco WLC to provide this information to Cisco ISE9

  • A. enable IP Device Tracking
  • B. enable MAC filtering
  • C. enable Fast Transition
  • D. enable mDNS snooping

Answer: B

NEW QUESTION 15
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?

  • A. subject alternative name and the common name
  • B. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
  • C. user-presented password hash and a hash stored in Active Directory
  • D. user-presented certificate and a certificate stored in Active Directory

Answer: A

Explanation:
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user. https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html

NEW QUESTION 16
......

P.S. Easily pass 300-715 Exam with 238 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 300-715 Dumps: https://www.surepassexam.com/300-715-exam-dumps.html (238 New Questions)